Question about 2006 kawasaki KX 250 F

1 Answer

2006 Kawasaki KX 250 F how to replace the kickstart lever shaft

Hi, I have 2006 kx250f and then the bolt holding the kickstart on the shaft snapped inside the shaft, therefore, I need a whole new shaft replacement. I removed the outer casing to expose the shaft and the kickstart gear but I am finding it difficult to remove it. Like impossible. It is stuck behind another large gear on the bottom right-hand portion of the kickstart gear(not sure what it is) and I am not sure how to remove it. Any help would be great. :) @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 55,816 Answers

Hi, Braydendeas for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kx 250 kick shaft replacement
Kick Start Lever Repair 1
http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf
OEM Parts for Kawasaki
2006 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Mar 05, 2018

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
dmsr63
  • 2050 Answers

SOURCE: how to remove the clutch from my kdx 200

The simple way to do it is borrow an electric impact gun. (1/2" drive) If you jam something in there you can damage things.

Posted on Jul 28, 2009

ZJLimited
  • 17970 Answers

SOURCE: I need the tourqe specs

For 1997 Kawasaki KX80 the manual says torque the cylinder and head to 18ft. pounds; a torque to yield type of bolt will fail when over torqued. Otherwise there should be no problem.

Good luck.

Posted on Jul 22, 2011

  • 176 Answers

SOURCE: How do I remove the

REGULAR/ PUT IT IN GEAR WITH THE CHAIN ON HOLD BACK BRAKE

Posted on Aug 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Kawasaki KX 250 F electric start kit


Hi, Jason for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Electric start for kx 250
electric start retrofit Kawasaki Forums
Kawasaki KX250F Service Manual
OEM Parts for Kawasaki
Kawasaki KX250F Owner Manual

Jul 08, 2018 | 2006 kawasaki KX 250 F

1 Answer

2006 Kawasaki KX 250 F kickstart lever bolt is stripped


Hi, Anonymous I recommend buying a new one, for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf
OEM Parts for Kawasaki
2006 Kawasaki KX250F Owner Manual
2006 Kawasaki KX250F Motorcycle USA
https://en.wikipedia.org/wiki/Kawasaki_KX250F

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 10, 2014 | 2006 kawasaki KX 250 F

1 Answer

2006 Kawasaki KX 250 F how to set the timing


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
how to set timing
Motocross Rider Edit How To Time TIMING 2014 Kawasaki KX250F
http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf
OEM Parts for Kawasaki
2006 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Dec 31, 2013 | 2006 kawasaki KX 250 F

1 Answer

2006 Kawasaki KX 250 F how to fix oil drain plug stripped threads


Hi, Lyman for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Stripped oil drain plug
Cheap Stripped Oil Drain Plug Thread Fix
http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf
OEM Parts for Kawasaki
2006 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Sep 29, 2013 | 2006 kawasaki KX 250 F

1 Answer

2011 kawasaki KX 250F jammed kickstart lever


Hi, Lucas for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
kx250f kick atart lever wouldnt move
https://www.vitalmx.com/forums/Race-Shop,42/Kickstarter-jammed,1210902
Kawasaki KX250F Service Manual
OEM Parts for Kawasaki
2011 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 18, 2018 | 2011 kawasaki KX 250F

1 Answer

2006 Kawasaki KX 250 F exhaust glowing cherry red


Hi, Heimjason and the usual suspects are:
1. Retarded ignition timing.
2. Retarded cam timing.
3. Bent or burnt exhaust valve.
4. Massive air leak.
5. Intake manifold cracked or damaged.
6. Intake manifold seals have failed.
7. Wrong heat range spark plug.
8. Fuel delivery system running too lean.
9. Faulty Map, O2, MAF, TPS, sensors.
10. Faulty advance mechanism.
11. Faulty VOES switch.
12. Aftermarket exhaust headers tubing too thin.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
KX250F Header pipe RED HOT
http://motocrosshideout.com/2012/06/17/is-a-glowing-red-head-pipe-okay
http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf
OEM Parts for Kawasaki
2006 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 29, 2012 | 2006 kawasaki KX 250 F

1 Answer

2004 Kawasaki KX 250 F choke lever will not stay up


Hi, Anonymous for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Choke won stay on
Choke wont stay up No problem watch this easy fix
http://www.mxguy.com/downloads/service_manuals/2004_KX250F_Service-Manual.pdf
OEM Parts for Kawasaki
2004 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jan 01, 2012 | 2004 kawasaki KX 250 F

1 Answer

2006 Kawasaki KX 250 F will not start when hot


Hi, Briar613 and the usual suspects are:
1. Faulty ignition coil.
2. Faulty spark plug cables.
3. Faulty temperature sensor.
4. HISS light not going off.
5. Faulty starter motor.
6. Valves adjusted too tight.
7. Spark plug gap too wide.
8. Fuel has vapor lock.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Bike starts runs shut off then won start again
KX250f Trouble Starting
http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf
OEM Parts for Kawasaki
2006 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Mar 28, 2011 | 2006 kawasaki KX 250 F

1 Answer

2006 Kawasaki KX 250 F engine oil capacity


Hi, Tomandabi for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to change the oil in your 2006 KX250F
2006 Kawasaki kx250f oil change
http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf
OEM Parts for Kawasaki
2006 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jan 02, 2011 | 2006 kawasaki KX 250 F

1 Answer

2006 Kawasaki KX 250 F bike dies when the clutch lever is pulled in


Hi, Jasonstein the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Bike died while pulling clutch lever KawiForums Kawasaki Motorcycle Forums
http://www.kawasakimotorcycle.org/forum/kawasaki-motocross-offroad/69807-kx-250-stalls-when-put-into-gear.html
http://www.mx-sport.ru/files/servicemanual-KX250f-06.pdf
OEM Parts for Kawasaki
2006 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 18, 2010 | 2006 kawasaki KX 250 F

Not finding what you are looking for?
2006 kawasaki KX 250 F Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5851 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

richard libby

Level 2 Expert

202 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...