Hi
You can download the whole workshop service manual that has this info and heaps more from here. Hope this helps Thanks for using Fixya.
regards
robotek
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Standard oil level:
90 mm (3.54 in)
Extent of adjustment:
80 ~ 120 mm (3.15 ~ 4.72 in)
From top of outer tube with
inner tube and damper rod fully
compressed without spring.
CAUTION:
Adjust the oil level in 5 mm (0.2 in) incre-
ments or decrements. Too low oil level
causes the front fork to produce a noise at
full rebound or the rider to feel some pres-
sure on his hands or body. Alternatively,
too high oil level will develop unexpectedly
early oil lock with the consequent shorter
front fork travel and deteriorated perfor-
mance an characteristics. Therefore, adjust
the front fork within the specified range.
1985 YZ250N, With the Fork off, Cap off, Spring out, take a clear school plastic ruler pore in 5W synthetic fork oil till it's 135mm from the top with the fork tube all the way down, till it just touches the ruler and the 135mm mark. Reinstall the spring, pacer, washer, Damping rod to cap, and install back in the clamps. I raced this bike for 18months in 1985/1986. Change the seals when they leak and toss the 38Kg Fork springs for 41Kg + springs to your riding weight. Over all was a good fork for it's time and Race tech can rebuild the fork and shock to your riding style and you're riding weight. I Miss the Fork flex on hard landings to my other New bikes. I still ride and Race the 85,YZ490 with the same fork.
Hi
You can download the whole workshop service manual that has this info and heaps more from here. Hope this helps Thanks for using Fixya.
regards
robotek
×