How do i adjust the height of the rear brake pedal of my Honda FMX 650? or is it not even possible?
Adjust the master cylinder piston rod longer or shorter thats it, longer rod less travel. !!!!
SOURCE: Rear brake light will not come on when rear brake is applied
If your brake lights are not coming when pressing the foot brake this means that there is something wrong with the switch..Have a closer look near the brake lever and you will see a spring attached to it which in turn is connected to the brake switch..Try to pull it down and if you see your brake lights working then you only need to adjust the spring setting..Else try to make a manual close connection and if it goes on then replace the switch..
SOURCE: Front brake too stiff on 1984 Honda Shadow VT500C Shadow
You should have disc brakes??? They are not adjustable.
It is common for a caliper piston to freeze up or become corroded and bind up so it will not move freely.
SOURCE: Honda FMX 650 - quantity of hydraulic oil
The best way,is to drain a fork leg into a container, and measure the amount. however if you cant do that, start of with about 100ml in each leg, test them out, if to soft, you can always add a little more oil. from memory, a 250ml bottle of fork oil was enough to do both legs on most bikes.
SOURCE: how do i adjust the rear brake on a 1990 honda
Tighten the nut on the operating rod. Keep an eye on the wear indicator ...
109 views
Usually answered in minutes!
×