Rear indicators are working fine then when you switch on to dipped head lights they go dim and nearly out when u rev up the bike they go bright again but front ones dim down slightly and you can see the headlight flicker slightly when indicator is on and also tail light has a slight flicker when indicators are on
SOURCE: headlight will not work.
also check the box that control the light. this es the one that does no let the light come on until gets the signal after pressing the starter
SOURCE: Kawasaki vulcan 1500 tail light intermittant problem
well i would try the switch and see and if that doesnt work then check the wiring for a loose connection or ground or maybe it could be as ez as checking the light bulb it might be loose in the socket
SOURCE: bike isn't starting. Not even turning over.
bikes have a lot of safety switches check all of them
Testimonial: "Finally found the problem with the kick stand cutoff"
SOURCE: headlight wont work all other lights good
A couple of ideas off the top of my head:
My two cents, hope it helps.
SOURCE: Ignition light on ,horn works ,indicators work will not start
Check your fuse then try again. Do not forget to check your main fuse- the ribbon type (30Amp)
77 views
Usually answered in minutes!
×