What do i need to do to adjust the valves on my 1600 roadstare yamaha
SOURCE: how to set electric clock on 2003 yamaha roadstar silverado
hold both buttons down @ same x. they will start to blink. hit left button once and hour will blink. use right one to go up. repeat for mins.
SOURCE: how to adjust 2007 yamaha roadstar 1700 carberator
The most common adjustment would be to adjust your idle mixture screw. These guys make the job very easy with a thumbscrew to do the job. Tell them I sent you and that you need carb help. http://www.maxairengineering.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=MPS-PRO-RDSTR&Category_Code=ROADSTAR&Product_Count=3
They are great guys and very helpful. They have my bike running the best it ever has.
SOURCE: Paint codes for 2005 Yamaha Roadstar Black & white
http://www.colorrite.com/matrix-colors.cfm?CFID=1620536&CFTOKEN=74145802
Go here my friend.
Bob
SOURCE: How do you check the oil in a 2003 yamaha roadstar
all bike are to be checked in the upright position! then find out how much the bike takes from your manual if you dont have a manual ...do the following ..when you just change oil and not filter you will be adding less oil,"almost" all bikes take @ 3 quarts oil minimum, so what i do to be safe!! is always after draining is put in two quarts no problem, but with the third bottle i only pour in half.. drop oil cap back on and start the bike and let it run for a minute, the turn it back off, then check oil level, if it doesn't register anything on the stick or sight glass then your o.k. to add the rest. now take a reading, and only fill to almost full, i always under fill my bikes, because over filling will cause damage to internal bearing by the air bubbles from the splashing of the crank in the oil pan. Same as cars.
If you found this helpful can i get a rating?
Thanks
1,640 views
Usually answered in minutes!
×