SOURCE: Dyna Wide Glide Rear Tire
i called a place ( hogpro.com) about wheels for my 07 fxdwg and talked to the guy there. he said a 180 will fit with no problems and a 200 will fit in the swingarm and fender, you just have to center the wheel and deal with the turn signal brackets etc. Does anyone know where i can get a set of rear struts that are just plain with no recess for the turn signals that will bolt on to the stock bike? I am gonna try the 200/55-18 this winter on a 18x 5.5" wheel.
SOURCE: Dyna Wide Glide Rear Tire
i called a place ( hogpro.com) about wheels for my 07 fxdwg and talked to the guy there. he said a 180 will fit with no problems and a 200 will fit in the swingarm and fender, you just have to center the wheel and deal with the turn signal brackets etc. Does anyone know where i can get a set of rear struts that are just plain with no recess for the turn signals that will bolt on to the stock bike? I am gonna try the 200/55-18 this winter on a 18x 5.5" wheel.
SOURCE: how do i remove the rear wheel on a 2005 harley
you should not have to remove shocks dont do that to remove wheel loosen the back section of your exhaust the nut that holds it is the only one you need to take off the back section of your exhaust now loosen the tension screws in front of the axle nut on both sides this creates slack on your belt or chain drive take off big nut on axle use tools on both sides at same time to keep axle from spinning take weight off of wheel just enough to allow wheel to be wiggled and slide the axle out you can tapp on axle just not on threads if you have to beat on it place nut on axle loosly and hit only to free it up it should slide out after a few taps the brakes are on a spacer style format on axle rememmeber with spacer goes on which side they are different in size to accomadate wheel spacing to brakes and belt alignment when wheel drops remove drive type belt or chain wheel should roll out of place you may need to lift bike higher with lift or jack to clear fender on roll out ta dah you have your wheel off to put back on reverse this order i change all my own tires have done all types for friends i hope this helped you
SOURCE: how do you change the battery on a 2005 dyna wide
I have a '94 model FXDWG and I don't know if Harley has changed anything or not but here's how I get mine out.
Remove the seat first. Then the battery cover will come off the top and around the battery. Look on the left side of the battery tray that there are two bolts going into the frame. Loosen these bolts. Now back up on top of the frame behind the battery, there is a bolt that raises and lowers the battery tray. Lower the battery tray. Disconnect battery cables (negative first always). Remove battery.
Hope this helps.
97 views
Usually answered in minutes!
×