SOURCE: How do I remove the throttle to replace the cable
unscrew the top of the carburator and see if the spring is compressed when turning the throttle. If this has been done, you can reattach if not broken, if so replace cable. You might check that the throttle was replaced into the carburator the proper way, it can be 180 degrees out.
SOURCE: 1981 Yamaha MX upper replacement throttle cable.
Yes, take the cap off the carb and disconnect the cable then do the oil pump cable. The connector tube should then come apart for upper cable replacement. Please rate my answer. Thanks.
537 views
Usually answered in minutes!
×