SOURCE: i want a manual for cagiva mito 125 year model
Go to, http://www.mmra.org.uk/marci/mito/
should be able to download the 1 you want
SOURCE: cagiva solenoid
1. Battery Voltage. - Key off: between 12 - 13VDC.
2. Key off Amp Draw - At the main fuse: < (less than) 1ADC
3. Key on Amp Draw - At the main fuse: Results will vary because of different loads.
*Note - DO NOT START THE BIKE WITH YOUR METER IN PLACE OF THE MAIN FUSE! Also, if you can not access the main fuse, put your positive meter lead on the red wire at the solenoid, and put your negative meter lead on the positive battery lead. This way you will be able to get your amperage readings AND let you start the bike without blowing your fuse.* Charging amperage should be at least 1 ADC
4. Break even speed - The RPM in which the charging voltage at the battery turns positive - Should be before Idle
5. Charging voltage at the battery - Between 13 - 15 VDC.
hope the above details help.thanks for using fixya.
Testimonial: "thanks alot was very helpful :)"
SOURCE: my cbr was stolen about a week ago and i want to
well ive riden my cagiva ( the same as ur m8) 90 miles non stop with out overheating , just make sure u have enough anti freeze and dont ride it fast for a long tym at once
SOURCE: my cagiva mito 125 it revs up 2 7rpm then starts 2
clean carb , clean sparkplug and some fresh fuel might help
SOURCE: hi i have a cagiva mito 125 1992 i can ride for a
might be your spark plug or your jets in your carb need setting or poss could be your choke cause sounds like a fuel problem mate ,if youve sorted it let me know what it was but thats what i would say !!
45 views
Usually answered in minutes!
×