2008 Honda XR 125 L Logo

Related Topics:

Posted on Oct 06, 2017

2012 Honda XR125 wiring diagram

My 2012 Honda XR 125 has two visible black wires running into the clutch lever assembly, somebody pulled these wires out of the clutch lever assembly but the bike starts fine without it I just want to know which wire goes where because I can't see any difference when I switch the wires in the working of the bike, is there a specific order for these wires?

5 Related Answers

Steve Archer

  • 148 Answers
  • Posted on Jan 07, 2009

SOURCE: electric start dont work

You probably have a bad switch

First look to se if there are any fuses
also see if horn works

FIX for determining if starter works


to find out take jumper cables and put the red cable on the plus side of the battery and the black on the minus side of battery(ground)

Put the black lead(ground ) on the frame of the bike near starter and touch the red to the starter lead( you may have to peel back rubber boot over starter nut

when you touch the starter nut it will spark and should spin over

if it does then you need to remove the screw assembly that holds the starter button and remove and clean it out with electronic cleaner (you may have to replace it if so go to honda shop and order new one


Good luck

Ad
jmgldsmth

Jim Goldsmith

  • 2005 Answers
  • Posted on Apr 24, 2009

SOURCE: !983 honda magna v45 clutch not engaging

if you rebuilt your carburetors you have made a mistake when you reassembled them a carb must sprsy a fine mist of "dry" fuel into the engine intake your carbs are flooding you need to check your fuel floats , jets and, don't forget to check the power piston circuit and, balance (sync) your carbs on the bike when you're done
your chuch is fine if you did not touch it

Brian Anderson

  • 399 Answers
  • Posted on Oct 06, 2009

SOURCE: 1997 Honda XR 600 R wiring diagram?

In the Service manual. Here is a link where you can download a free pdf file.

http://motoservicemanuals.blogspot.com/2009/03/honda-xr-600r-service-manual.html

Anonymous

  • 1689 Answers
  • Posted on Oct 10, 2009

SOURCE: need to know how to wire the lot on a off road honda xl 125 r

here is the manual and wiring diagram

http://www.ebookspdf.com/search/honda+xl125R+wiring+diagram

and more resources

http://pdftown.com/search/node/wiring+diagram+holden+rodeo

tombones

  • 3567 Answers
  • Posted on Oct 18, 2009

SOURCE: Need to know the mixture settings on the carb, 04

From a LIGHTLY seated position, turn both adjusting screws outward one and one half turns. This is the stock setting.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Honda xr125 L blowing 15amp fuse while i was riding no lights or starter or horn

Sounds like a short like the insulation on wire rubbed off. Could also be a loose connection on either the hot or ground side of light circuit. This would blow a fuse.
12helpful
2answers

When is the choke on my honda xr125 on please.

the 3 settings are - middle to start bike then down is off, up is on,
0helpful
1answer

I am looking to print of a wireing diagram for a honda XR 125 l 2003 as i have a problem with it not sparking please could you help

remove the tank and look for the black and white wire going in to the CDI disconect it and see if you have spark. If you have look at the kill switch or ignition switch or wiring...This wire has to make contact with the frame to kill the engine....If you stiil have no spark let me know and Ill email you one...
Not finding what you are looking for?

752 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...