First check to be certain that the battery is fully charged
Next, be certain the battery terminals are clean and tight. Don't just look at them, disconnect the cable from the battery and clean the contact surfaces with a wire brush. They should be tight enough so that you cannot easily twist them by hand.
If you still have a problem, locate where the ground wire coming from the battery is connected. to the engine or frame Disconnect it and clean the contact surfaces, then replace it and tighten the connection.
The type of problem you describe is usually caused by poor ground, however if you still have a problem (after disconnecting the ground cable from the battery) trace the positive wire from the battery to its connection and be certain it is clean and tight.
Let us know that solve your problem
.
The
2000 Dodge Intrepid is equipped with an alarm system that is triggered
when unauthorized entry is attempted. In some situations, such as having
the Intrepid valet parked or when it is being serviced by a mechanic,
the alarm system needs to be disarmed so it doesn't go off. Disarming
the alarm will prevent it from being activated until it is armed again.
Difficulty: Moderate
Instructions
102 views
Usually answered in minutes!
×