Knocking sound on honda wave 100

Philipino to ENGLISH: Where is the chase number of wave 100

Do you mean the 'Chassis number'. We only speak English here.

Showing results for Where is the chassis number of wave 100.
Search instead for Where is the chase number of wave 100.
Location of chassis number of Honda Wave 100
Locate the 17-digit Vehicle Identification Number (VIN) printed on the frame of your Honda motorcycle. This is often stamped onto the right side of the steering head, where the front fork is mounted on the frame. The VIN is also imprinted on a metal tag located on the left side of the frame above the motor.

Honda Motorcycles Model Prefix - VIN Number

https://www.motorcyclespareparts.eu > ... > Honda Parts
Search for: Location of chassis number of Honda Wave 100

..

you developed a knock in the engine, sounds confusing but your engine computer can't separate bad bearing from pre-ignition, engine knock, to cure this your computer retards the spark, to the max to stop the knock, confuses the computer to the max

Here you can find step by step instructions.

http://www.wikihow.com/Ride-a-Honda-Wave-100



Honda Wheels

probably a rod knock

knocks when cold ( Start ), then sort of diminish or disappears when warming up ???

Knocking goes faster when accelerating when cold ???

If Yes, then Piston knocking on the wall of the cylinder . The sound disappears as the engine is getting warmer it dilates and the gap gets smaller.

If this just started,

1. Put quality oil & filter ( Mobile Full Synthetic Oil & Mobile Oil Filter or Purolator )

2. Do not put cleaning agents mixed with oil.

3. Personaly i've put "Restore" Engine Restorer & Lubricant in cars with more then 200 000 km and the results are amazing. But only "Restore". My Volvo is at close to 300 000 km, and it runs great. It's not a cleaning agent.

By experience if the knocking just started you can put an easy extra 100 000 km on the engine before a rebuilt. Quality Oil & let the engine warm up ( 3 mins ).

Ask them to check the knock sensor