Power Motorcycles - Answered Questions & Fixed Issues

The switch needs some rubbing alcohol poured in to rid corrosion. But it cud also be worn..take it out n inspect. Buy a bike shopbook

Power... | Answered on Oct 15, 2019 | 19 views

There is a recall that may affect your turn indicators!

The issue pertains to the wiring harness in the headstock. According to Triumph, the clutch cable rubbing against the wiring harness leads to the wires getting damaged. This can cause electrical systems like the headlamp, turn indicator and in some case ignition system like the engine kill switch to malfunction. As a result of this, you cannot switch off the bike.


You are not alone with indicator issues.


Power... | Answered on Sep 04, 2019 | 19 views

Battery backwards. Or normal indicating you're connecting power? It's so7nds like it's running to ground

Power... | Answered on Aug 20, 2019 | 23 views

anything from overheating -power spike -short-loose connection -component failing

Power... | Answered on Aug 19, 2019 | 281 views

It shouldn't if the battery holds a charge and is fully charged. You can pull headlight fuse to test during the day, but this may be ******* in your state and can get you a ticket. It is most likely a fuel or valve leakage, adjustment problem.

Power... | Answered on May 06, 2019 | 22 views

Check your throttle cable. It may have become dislodged or broke.

Power... | Answered on Apr 02, 2019 | 29 views

When the solenoid is activated, check there is power to the starter motor, if there is, the motor is at fault.

Power... | Answered on Mar 21, 2019 | 29 views

It sounds like you are having an electrical issue. If your bikes system is not being supplied with at least 12.6+ volts, it’s starving to supply enough energy to maintain. Ensure that your charging system is working. Try putting some fuel injector cleaner through the system, as well.
It sounds like you may be picking up some trash, as well.
If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!

Power... | Answered on Mar 12, 2019 | 284 views

First check battery cable to see if it's loose, then check fuses, then check grounds. Oh yeah make sure battery is fully charged.

Power... | Answered on Jan 16, 2019 | 33 views

  1. Check your starter relay fuse. It's probably blown. If not that, (and you obviously have checked for power to the relay fuse when you push the start button, right?) then you should replace the starter relay. $10 to $20, 30 minute job if it's your first time.

Power... | Answered on Jan 09, 2019 | 33 views

You may download a manual from the following site. Power Commander Downloads

A free STDU Viewer which does a nice job of viewing PDF files exists. You may wish to give it a try.

Power... | Answered on Oct 23, 2018 | 28 views

Not finding what you are looking for?
Power Logo

Ask a Question

Usually answered in minutes!

Top Power Experts

D. E. Hev

Level 3 Expert

1187 Answers


Level 3 Expert

3042 Answers


Level 3 Expert

85206 Answers

Are you a Power Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides