Power Baghira Street Moto - Recent Questions, Troubleshooting & Support

If your model is the 90 then it should be a 4 stroke engine you put 10w30 or 10w40 oil in the engine and gas in the tank. Do not mix oil into the gas tank on a 4 stroker you will knacker the engine big time.

If however you have a definite 2 stroke model, you have 2 oil tanks one for the gearbox, and the plastic one under the seat for the engine.

Gearbox tank fill with 10w30 oil the plastic tank under the seat with 2 stroke oil. The 2 stroker mixes the oil and gas so you don't need to.

Power Baghira... | Answered on Dec 29, 2014

The switch needs some rubbing alcohol poured in to rid corrosion. But it cud also be worn..take it out n inspect. Buy a bike shopbook

Power... | Answered 54 minutes ago

There is a recall that may affect your turn indicators!

The issue pertains to the wiring harness in the headstock. According to Triumph, the clutch cable rubbing against the wiring harness leads to the wires getting damaged. This can cause electrical systems like the headlamp, turn indicator and in some case ignition system like the engine kill switch to malfunction. As a result of this, you cannot switch off the bike.


You are not alone with indicator issues.


Power... | Answered on Sep 04, 2019

Battery backwards. Or normal indicating you're connecting power? It's so7nds like it's running to ground

Power... | Answered on Aug 20, 2019

anything from overheating -power spike -short-loose connection -component failing

Power... | Answered on Aug 19, 2019

It shouldn't if the battery holds a charge and is fully charged. You can pull headlight fuse to test during the day, but this may be ******* in your state and can get you a ticket. It is most likely a fuel or valve leakage, adjustment problem.

Power... | Answered on May 06, 2019

It sounds like you are having an electrical issue. If your bikes system is not being supplied with at least 12.6+ volts, it’s starving to supply enough energy to maintain. Ensure that your charging system is working. Try putting some fuel injector cleaner through the system, as well.
It sounds like you may be picking up some trash, as well.
If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!

Power... | Answered on Mar 12, 2019

First check battery cable to see if it's loose, then check fuses, then check grounds. Oh yeah make sure battery is fully charged.

Power... | Answered on Jan 16, 2019

  1. Check your starter relay fuse. It's probably blown. If not that, (and you obviously have checked for power to the relay fuse when you push the start button, right?) then you should replace the starter relay. $10 to $20, 30 minute job if it's your first time.

Power... | Answered on Jan 09, 2019

You may download a manual from the following site. Power Commander Downloads

A free STDU Viewer which does a nice job of viewing PDF files exists. You may wish to give it a try.

Power... | Answered on Oct 23, 2018

Not finding what you are looking for?
Motorcycles Logo

Popular Products:

-2 questions posted

Ask a Question

Usually answered in minutes!

Top Power Experts

D. E. Hev

Level 3 Expert

1187 Answers


Level 3 Expert

3042 Answers


Level 3 Expert

85178 Answers

Are you a Power Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Power Motorcycles

  • Forum

View Most Popular

  • Power Motorcycles