2006 Yamaha Road Star Midnight Silverado - Page 4 - Answered Questions & Fixed issues
How to set the YAMAHA Fz400r MOTORCYLE timing mark
The Fz400r is a motorcycle engine produced by Yamaha. To set the timing mark on the Fz400r, follow these steps:
- Remove the side cover from the engine to expose the timing mark.
- Locate the timing mark on the rotor, which is a small line or notch on the outer edge of the rotor.
- Use a timing light to align the timing mark on the rotor with the "T" mark on the stator.
- Loosen the bolts that secure the stator plate in place.
- Adjust the position of the stator plate until the timing mark on the rotor is aligned with the "T" mark on the stator.
- Tighten the bolts that secure the stator plate in place.
- Reattach the side cover to the engine.
It's important to consult the Fz400r's service manual for detailed instructions on setting the timing mark and to ensure proper timing of the engine.
2/14/2023 11:15:54 PM •
Yamaha...
•
Answered
on Feb 14, 2023
•
90 views
My 2008 Yamaha V star mill turnover when I tried to start it but will not fire up. Why and I don't think I'm getting spark to my coil packs.
A motorcycle that turns over but doesn't start can be caused by a few different things. Some possible causes of the issue you are experiencing with your 2008 Yamaha V Star include:
- Fuel supply problem: If the fuel pump is not working properly or the fuel filter is clogged, it can prevent fuel from reaching the engine.
- Ignition system problem: If there is no spark at the coil packs, it could be due to a malfunctioning ignition module, a bad spark plug, or a problem with the ignition coil.
- Mechanical issue: If the engine is not getting compression, it could be due to a valve problem, a broken timing chain, or a seized piston.
- Electrical issue: If the engine is not getting power, it could be due to a dead battery, a corroded connection, or a problem with the starter.
It's best to check the battery and all the electrical connections first, also check if the spark plugs are fouled or damaged, if so change them
1/27/2023 4:56:48 PM •
Yamaha...
•
Answered
on Jan 27, 2023
•
60 views
2007 Yamaha v star 650 fuel milage?
frankly if it were mine and if runs great now then let it run .. the leaner the mixture the hotter the combustion which can burn valves. it might get better mileage after break-in but if 40 is what you got then 40 might be all you get.. Thats about what my vulcan gets. if you want really high MPG then you have to sacrifice speed .. a moped will get around 70MPG but it's not much fun and has no power to get out of the path of danger
12/24/2022 11:34:41 AM •
Yamaha...
•
Answered
on Dec 24, 2022
•
371 views
Wiring of yamaha 350 warrior stator 2003
https://quads.ddns.net/service-manuals/yamaha/Warrior.pdf ---------------------- https://www.manualslib.com/manual/941548/Yamaha-Yfm350x-Warrior.html
11/28/2022 4:54:13 PM •
Yamaha...
•
Answered
on Nov 28, 2022
•
64 views
Yamaha Vstar ignition issue
Hi,
please double check that all the parts your replaced are compatible with your vehicle. Compatibility would be the only thing that I can think of. You might want to have a mobile mechanic diagnose the issue as well so they can see everything firsthand. They might use a multimeter to test all points of electric signals possible to make sure that each points is passing some type of current and there are no dead wires.
Thank you.
11/13/2022 3:05:37 AM •
Yamaha...
•
Answered
on Nov 13, 2022
•
65 views
2007 Yamaha Virago taillight doesn't work
All vehicles built after 1927, for road use, must have a working tail light.
Yes it has one, probably needs a new bulb or reconnect the socket on the mud guard.
11/5/2022 7:34:58 AM •
Yamaha...
•
Answered
on Nov 05, 2022
•
30 views
Not finding what you are looking for?