20 Most Recent 2006 Yamaha Road Star Midnight Silverado - Page 2 Questions & Answers


the mechanic should be checking you side bushing . if the shock is fine then try to check the bushing it could be the problem.

Yamaha Road Star... | Answered on Jul 30, 2009


Hi, Toni for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
1982 Yamaha XT550 wiring diagram Google Search
Yamaha Xt 550 Wiring Diagram
Yamaha XT550J Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xt-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Yamaha... | Answered on Oct 15, 2019


Hi, William all bulbs must be 6-volts, for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Hyosung, despair not, for a mere $20 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=6-volt+turn+signal+bulb+1972+Yamaha+LT2+100&source=univ&tbm=shop&tbo=u&sa=X&ved=0ahUKEwjEvf2SnJzlAhXOtVkKHZxWCPUQsxgILw&biw=1440&bih=757
https://www.jpcycles.com/motorcycle-taillight-and-turn-signal-bulbs/6-volt
https://www.repairmanuals.co/products/yamaha-motorcycle-repair-service-manual-choose-your-motorcycle-instant-access?cmp_id=992550392&adg_id=47921554743&kwd=&device=c&gclid=EAIaIQobChMIs9mqr5yc5QIVAeiGCh3zDwbeEAQYAiABEgIC5fD_BwE $20
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha/

Yamaha... | Answered on Oct 14, 2019


Hi, Zakaria the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts enquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.thisoldtractor.com/mg_manuals/book_motorcycle_identification.pdf

Yamaha... | Answered on Oct 11, 2019


Hi, Douglas external oil deposits fall into 3 categories:
1. WEEPAGE is the oil that is sweated pass gaskets, seals, o-rings, and crankcase seams, it's covered by dry dust and is normal for older engines with lots of miles, no repair is necessary.
2. SEEPAGE is the same as weepage except the deposit is wet and confines itself to a specific area, the repair is optional depending on the owner's cleanliness criteria, the deposit location and the weight of his bag of "DRACHMA"
3. LEAKAGE is the same as seepage except it is enough to drop to the ground leaving a spot. Repair as necessary.
To find the source of your oil leak, start at the point where you see oil and trace its path going up and forward, blowing baby powder from the palm of your hand will help in those difficult to see areas if there is too much oil present then buy a spray can of engine degreaser apply it to the affected area then rinse off with a pressure wand or garden hose, use compressed air to blow off excess water or just let it drip dry, take your bike for a 15 minute ride and check for the leak.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://mechanics.stackexchange.com/questions/5785/how-to-find-and-fix-an-oil-leak-on-a-yamaha-scooter
https://www.youtube.com/watch?v=FgtAMIOps_8
https://www.manualslib.com/manual/983364/Yamaha-Xc125.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/597176/Yamaha-Cygnus-X-Xc125.html

Yamaha... | Answered on Oct 05, 2019


Hi, Shazngaz35 and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/291948-bike-only-runs-with-choke-on/
https://www.youtube.com/watch?v=sK8t3-XI-FE
https://www.manualslib.com/manual/591730/Yamaha-Pw80t.html
https://www.partsfish.com/page/oem-parts-for-yamaha
http://www.yamahaownershandbook.com.au/?r=0

Yamaha... | Answered on Sep 28, 2019


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Improper valve clearance (too tight)
17. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
18. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
19. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
20. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
21. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
22. Faulty neutral, clutch, kickstand safety switch.
23. Faulty fuel pump or fuse or relay.
24. Faulty or corroded run/stop switch.
25. Tilt sensor needs a reset.
26. Security system not disarming alarm needs a reset.
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.pitbikeclub.co.uk/showthread.php?t=27564
https://www.motorcyclecruiser.com/what-to-do-if-your-motorcycle-doesnt-start
https://www.pitbikeclub.co.uk/showthread.php?t=28477
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/611378/Yamaha-Pw50-V.html#product-PW50

Yamaha... | Answered on Sep 28, 2019


4. Air leaks: If excessive air leaks into the intake ahead of the impeller, the jet unit will "slip". Possible sources of air leaks are though a faulty gland seal, which is usually accompanied by a static water leak into the boat when standing idle.
So if the gland is worn out and leaking into the boat with the engine off, it can also suck air when accelerating on to plane, and if this happens, then the thrust is reduced dramatically. Air can also be introduced into the system via the inspection cover, so you will want to make sure the cover is tight.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ACYBGNRVe0tQKMAxqCrcTR1kSlkDN27UCg%3A1569678054788&ei=5mKPXZPaL9COggeIjojoCQ&q=Yamaha+jet+boat+Jet+drive+sucking+air

Yamaha... | Answered on Sep 28, 2019


Hi, James for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/404776-79-mx100-carb-settings/
https://www.youtube.com/watch?v=g6y32Gw5HK4
https://www.tradebit.com/filedetail.php/6902433-download-now-yamaha-mx100-mx-100-service $15
https://www.partsfish.com/page/oem-parts-for-yamaha
https://mybikemanuals.com/yamaha/yamaha-mx-owners-manuals/

Yamaha... | Answered on Sep 23, 2019


Hi, Sanjay for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=R15+v1+speedo+meeter+white+display+light+not+working&tbm=isch&source=univ&sa=X&ved=2ahUKEwj89bTQpObkAhWxmuAKHfE0Dg4QsAR6BAgIEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=vRbAfAbe-oc
https://www.manualslib.com/manual/1096691/Yamaha-Yzf-R15.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/863470/Yamaha-Yzf-R15a.html

Yamaha... | Answered on Sep 23, 2019


Hi, Billy for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.yam-r125.net/adjusting_the_valve_clearance-125.html
https://www.youtube.com/watch?v=Rr06fihgd_s
https://kservico.com.ph/product/ytx-125/
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.yamahamotorsports.com/motorsports/owners-manuals

Yamaha... | Answered on Sep 23, 2019


Hi, Tandy and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery damaged or nearly discharged, should have 12.5 volts.
4. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or the fuel line is closed off, restricting fuel flow.
10. Choke valve inoperative.
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.facebook.com/171109872920925/photos/a.238194019545843/374609199237657/?type=1&theater
https://mechanics.stackexchange.com/questions/5643/motorcycle-with-efi-not-starting-well
https://usermanual.wiki/Document/yamahat115servicemanualuoezmze.582485069.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
http://www.yamahaownershandbook.com.au/?r=0

Yamaha... | Answered on Sep 23, 2019


Hi, Rhys for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Mikilon, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=wiring+diagram+1996+yamaha+virago+750&tbm=isch&source=univ&sa=X&ved=2ahUKEwjfwsPf9-XkAhUKcq0KHV5cC58QsAR6BAgIEAE&biw=1440&bih=757
http://www.classiccycles.org/1852/597985.html
http://ironbrothersmc.com/motors/Yamaha/Yamaha_XV_V-Twins_81-94.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
https://mybikemanuals.com/yamaha/yamaha-xv-owners-manuals/

Yamaha... | Answered on Sep 23, 2019


Hi, Arthur and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. A faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://motorcyclistlifestyle.com/hotwire-a-motorcycle/
https://www.youtube.com/watch?v=JRD58qqmRWE
http://www.xjcd.org/book/export/html/77
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/898875/Yamaha-Xj600sk.html#product-Seca%20II

Yamaha... | Answered on Sep 23, 2019


It appears to be a part of the battery. When you look at the battery there is a plug attached to it.

Yamaha... | Answered on Sep 19, 2019


it will clean up your carbs somewhat. i use it in every engine driven device i own except my cars...maybe you need to set your idle speed a bit higher???

Yamaha... | Answered on Sep 14, 2019

Not finding what you are looking for?
2006 Yamaha Road Star Midnight Silverado Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

D. E. Hev

Level 3 Expert

1187 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

vince

Level 3 Expert

1234 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Road Star Midnight Silverado Yamaha

  • Road Star Midnight Silverado Yamaha

Most Popular Question

2006 yamaha roadstar showing oil

  • Motorcycles
Loading...