20 Most Recent 2004 Yamaha V Star 1100 Custom - Page 9 Questions & Answers


Hi, Aron before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Troubleshooting bike that wont crank
Starter clicking repeatedly but won turn over Not the battery Any help
Yamaha XS1100SH Service Manual
OEM parts for Yamaha
Yamaha 1979 XS1100E Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Yamaha... | Answered on May 05, 2019


Hi, Charlie the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1987 YAMAHA YSR 50T Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha
https://www.teamcalamari.com/ysr/ysrspec.html
https://en.wikipedia.org/wiki/Yamaha_YSR50

Yamaha... | Answered on May 04, 2019


Hello Robin, for what you describe, your son's Yamaha does not work
Carefully and the equipment disconnected from the power network, remove the lid and observe the fuses, in case they are burned, if you find any in this condition, replace it, if it burns again,
If you have technical knowledge, I send you the link to download the service manual, but go to a specialized technical service
I hope that soon your son, enjoy the Yamaha
Greetings Franco Dosil

Hola Robin, por lo que describes, el Yamaha de tu hijo, no funciona
Con cuidado y el equipo desconectado de la red de energia, retirale la tapa y observa los fusibles, por si estan quemados, si encuentras alguno en esta condicion reemplazalo, si se vuelve a quemar,
Si tienes conocimientos tecnicos, te envio el link para que descargues el manual de servicio, sino dirigete a un servicio tecnico especializado
Espero que pronto tu hijo, disfrute del Yamaha
Saludos Franco Dosil
https://data2.manualslib.com/pdf5/108/10704/1070308-yamaha/rxv557.pdf?ff31e469f9dad6737d1a64b9e7f58e92&take=binary

Yamaha... | Answered on May 02, 2019


Hi, Corey before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.visordown.com/forum/workshop/yamaha-virago-wont-turn-over
What To Do If Your Motorcycle Doesn Start
Yamaha XV1100 Virago 1981 1999 Service Repair Manual Download Manuals... $15
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha Virago XV1100K Owner Manual

Yamaha... | Answered on May 01, 2019


Hi, Bigfrank6 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.powerwale.com/motorcycle-bike-battery/yamaha/yd125/kick-start/487
https://www.youtube.com/watch?v=ZXgheysV47E
Yamaha Fault Codes
Yamaha YBR 125 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
YAMAHA YBR125ED Owner Manual

Yamaha... | Answered on Apr 24, 2019


WITH AN AMP METER OR EVEN A VOLT METER

Yamaha... | Answered on Apr 20, 2019


Hi, Ed for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://ourpastimes.com/identify-yamaha-its-engine-numbers-7517857.html http://www.thisoldtractor.com/mg_manuals/book_motorcycle_identification.pdf
https://www.blasterforum.com/threads/decoding-engine-numbers-not-frame-numbers.51924
Bike Identification
HELP decoding my engine serial number

Yamaha... | Answered on Apr 14, 2019


Hi, Gopinath for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.xbhp.com/talkies/motorcycle-ownership-experiences/20138-yamaha-yzf-r15-version-2-0-a-606.html
https://www.youtube.com/watch?v=l0zosNeZUNs
Yamaha YZF R15 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha YZF R15A Owner Manual

Yamaha... | Answered on Apr 14, 2019


find and buy the manual for it. we dont guess

Yamaha... | Answered on Apr 14, 2019


that would be the one thats on it already

Yamaha... | Answered on Apr 13, 2019


Hi, Martin parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another "EXCEPT" for the CDI's they are year-make-model "SPECIFIC" the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalog or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://xjbikes.com/forums/threads/xj-parts-catalog-section-d-electrical-system.44641
https://www.pinterest.com/pin/256071928788766541
Yamaha XJ700N Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha XJ700N Owner Manual

Yamaha... | Answered on Apr 13, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
ViragoTechForum com
Yamaha Vstar 1100 Clutch adjustment lower end
https://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha Virago XV1100K Owner Manual

Yamaha... | Answered on Apr 10, 2019


go back to school and learn to spell...nay parts??? really??

Yamaha... | Answered on Apr 10, 2019


On google there is a website that can explain it better then i can

Yamaha... | Answered on Apr 05, 2019


Make sure the new battery has been wired correctly + to + - to - I assume it worked OK before the original battery died.

Yamaha... | Answered on Apr 04, 2019

Not finding what you are looking for?
2004 Yamaha V Star 1100 Custom Logo

31 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Israel Pineiro Jr

Level 2 Expert

165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

V Star 1100 Custom Yamaha

  • V Star 1100 Custom Yamaha

Most Popular Question

engine idles fine stalls soon as its

  • Motorcycles
Loading...