20 Most Recent
1990 Suzuki GSX 750 F (Katana) - Page 2 Questions & Answers
Changing gear selector
easy mate, get an old screw driver a thin one heat the end up cherry red, bend over the las 5 mm cool it and put into seal and gently move round and pull out clean area tap new seal in with deep socket right way round, make sure you see how it came out
Won't start
Check the fuel level in the float chambers of the carbs, it could be too low! Readjust the float to obtain correct level. Blow out the primary and main jets with compressed air.
Hope you adjusted the air screw mixture at the right temperature of the engine i.e. you need to warm it up and than adjust also check the valve clearance of the engine.
Hope this helps
Not finding what you are looking for?