2006 kawasaki KX 125 - Answered Questions & Fixed issues


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Best oil to gas mixture for 00 KX 125
help kx125 fuel ratio
03 08 Kawasaki KX 125 250 Service Manual pdf
OEM Parts for Kawasaki
2005 Kawasaki KX125 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2006 kawasaki KX... | Answered on Feb 28, 2018 | 121 views


Hi, Anonymous the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki KX125 Service Manual
OEM Parts for Kawasaki
2005 Kawasaki KX125 Owner Manual
https://www.ultimatespecs.com/motorcycles-specs/kawasaki/kawasaki-kx-125-2006
https://en.wikipedia.org/wiki/Kawasaki_KX125

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2006 kawasaki KX... | Answered on Feb 27, 2018 | 17 views


If this is a 2 stroke engine it does not require an oil change.
If this is a 4 stroke engine most motorcycle manufacturers recommend 10W40 oil and an engine that size should require approximately 3 QTS of oil. However, personally I have always used 20W50 in all of my 4 strke motorcycle engines. You also mentioned a problem what is the problem with the KX 125?

2006 kawasaki KX... | Answered on Mar 18, 2011 | 238 views


Go to local motorcycle shop or try online.

2006 kawasaki KX... | Answered on Sep 27, 2010 | 96 views


It all depends on what type (and brand) of two stroke oil you're using. For example, some non-synthetic two stroke oils are supposed to be mixed at a ratio of 20:1. While most synthetic oils are designed to be mixed anywhere from 36:1 to 100:1. Your best bet is to follow the advice of the folks at your dealer as to the type of oil to use - and then follow the recommended mixing ratio as detailed in the oil manufacturer's instructions.

2006 kawasaki KX... | Answered on May 10, 2010 | 1,248 views


At end of cable hooks there is an adjuster for about 2-3 mim with adjuster nut.

2006 kawasaki KX... | Answered on Mar 24, 2010 | 57 views


hi mate i got an kx85 but haver never come accross this problem check the reed valves are not sticking and check to make sure the exhaust port is clear not full of carbon build up also check air filter is clean not cloged good luck

2006 kawasaki KX... | Answered on Nov 20, 2009 | 381 views


Check your compression,,Maybe you blew the rings,or the reed valves,,,oh,,you did check that you have fuel,,right?

2006 kawasaki KX... | Answered on Apr 07, 2011 | 254 views


I've been using the s100 cleaner. Never tried the brightener. I get mine from a sorta local (25 miles) shop

2006 kawasaki KX... | Answered on Nov 10, 2008 | 105 views


Hi, Billy2808509 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/1041942-ke100-gear-oil/
https://www.youtube.com/watch?v=J9KW5sW6ei0
https://www.manualslib.com/manual/860082/Kawasaki-Ke125.html
https://www.partsfish.com/page/oem-parts-for-kawasaki
https://kawasaki.com.au/download-owners-manuals/

kawasaki KX 125... | Answered on Jan 10, 2019 | 120 views


Hi, Antonejc the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day
Kawasaki KX125 Service Manual
OEM Parts for Kawasaki
1997 Kawasaki KX125 Owner Manual
Kawasaki KX 125 1997 Motorcycle Photos and Specs
https://en.wikipedia.org/wiki/Kawasaki_KX125

kawasaki KX 125... | Answered on Sep 21, 2018 | 348 views


Hi, Jeff you need a carburetor rebuild kit that has both needle and seat and the usual suspects are:
1. Damaged or restricted fuel tank venting system.
2. Loose float bowl screws.
3. Damaged float bowl o-ring.
4. improper fuel level in the float bowl.
5. Worn or dirty inlet valve or seat.
6. Damaged or leaking float assembly.
7. Particle contamination in inlet fitting cavity.
8. Damaged petcock diaphragm allowing fuel to flow through the vacuum line into the combustion chamber.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.kawasakimotorcycle.org/forum/kawasaki-motocross-offroad/46372-major-problem-fuel-running-out-carb-kx-125-a.html
kx125 carb leaking out of overflow
Kawasaki KX125 Service Manual
OEM Parts for Kawasaki
1995 Kawasaki KX125 Owner Manual

kawasaki KX 125... | Answered on Aug 14, 2018 | 92 views


Hi, Rst197 engine "BOG" is mainly caused by a rich air and lean fuel condition but it can also be caused by a lean air and rich fuel condition this situation rarely occurs and is only caused by the misinformed weekend warrior that owns a toolbox. If the bike has been sitting for months or years you will have to completely disassemble the carburetor and submerge the parts (except rubber parts) in "Carburetor Dip" It usually comes in a gallon bucket with a wire mesh basket that can be purchased at any automotive store. If it is not the above scenario then the following explanation will apply.
The more you open your throttle the more vacuum you are creating in your carburetor venturi and your intake manifold. When you are operating at higher RPM any unmetered air that leaks into your system can become more obvious.
Unmetered air is air that is getting into your system after the fuel has been delivered. If you have unmetered air getting into your system between the butterfly/slide of the carburetor and the cylinder head this will create a lean condition.
All of the rubber components of the fuel system like vacuum hoses and intake manifold that you mount the carburetor to are made of rubber. If none of these components have been changed they are more than likely highly degraded and probably cracked in places to allow unwanted-unmetered-contaminated air into the combustion chamber. Check all of your vacuum lines and vacuum plugs for carburetor synchronization. The vacuum plugs are in the head just after the rubber intake manifolds. The petcock has a vacuum line as well as part of the emission system.
1. Check the intake manifold for fissures.
2. Ensure the bands used to tighten the manifolds down on the intake are secure and have not bound up the manifold.
3. Make sure air box fittings are not warped and fit completely over the carburetor.
Your airbox is metering air and is the first step in a process of consuming air and fuel. The system requires the resistance of the air filter in order to get the proper vacuum to "SUCK" the fuel out of the float bowl and create the proper venturi effect.
Improper mounting and sealing of the airbox will create a small lean effect. This might seem like no big deal but you are inviting dust and debris in your engine that is doing slow damage by not having proper fitment. Fix it so you know it's not contributing to your issue. Pick the low-hanging fruit first.
Do not go and start adjusting anything at this point. It ran fine before. There is something wrong with the assembly or a component. Do not adjust your floats. Get it back to where it was. The moment you start tweaking everything is the moment you lose OEM settings which are a must-have for fine-tuning and maximum performance.
Fine-tuning your carburetor and multi carb syncing come at the very end following the proper procedure established by the Carburetor Gods.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
KX 125 engine bog from idle possibilities
http://dirtrider.net/forums3/threads/1998-kx125-bogging-help.99979
Kawasaki KX125 Service Manual
OEM Parts for Kawasaki
1999 Kawasaki KX125 Owner Manual

kawasaki KX 125... | Answered on Jul 18, 2018 | 44 views


Hi, Sophie, you are relentless, please contact me at xlch@mail.com and I will do what I can to help you.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

kawasaki KX 125... | Answered on Apr 27, 2018 | 29 views


Hi, Sophie, the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
Good luck and have a wonderful day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

kawasaki KX 125... | Answered on Apr 27, 2018 | 27 views


Hi, Sophie the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
Good luck and have a wonderful day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

kawasaki KX 125... | Answered on Apr 27, 2018 | 25 views


Hi, Sophie I could not find 1992 KX125 Transmission specs but the 1992 KDX125 has 6 speeds and a 1991 KX125 has 6 speeds

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

kawasaki KX 125... | Answered on Apr 26, 2018 | 153 views


Hi, Sophie after careful deliberation 4 out 5 Kawasaki Gods give this one a thumbs up, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki Replica Plastics
How to Rebuild Motorcycle Shock
Kawasaki KDX125 KDX200 KDX250 Complete Workshop Service Repair Manual 1989... $20
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki
Kawasaki KX125 Service Manual free

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


kawasaki KX 125... | Answered on Apr 26, 2018 | 69 views


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
99 KX125 Axle nut and Pinch Bolt Torque
Kawasaki KX250 Assembly Preparation Manual Standard Torque Table
https://www.scribd.com/doc/121008272/KX125-KX250-94-98-Service-Manual
OEM Parts for Kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

kawasaki KX 125... | Answered on Mar 09, 2018 | 60 views

Not finding what you are looking for?
2006 kawasaki KX 125 Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5954 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...