20 Most Recent
2000 kawasaki VN 800 Vulcan Classic - Page 2 Questions & Answers
Need to remove seat
May I suggest a trip to your local library. Cycle repair books should be in 646 stacks of reference.
I can start my bike
May be your bikes clutch plates are bad, try to replace the clutch plates it might work...
2000 800B. While trying to break the nut on the front sprocket, should the sprocket move with the nut?
Of course. The bolt is in the middle of the splined shaft and holds the sprocket as well. Some have a hole where you insert a rod to lock the sprocket, or you can put the bike in 1st Gear and give the breaker bar a sharp tap with a lump hammer. Or you can jam the chain somewhere back by the back sprocket, for instance putting a ratchet strap through the rear forks and the wheel, or you can get someone to apply the rear brake.
What is causing the rear wheel to lock when in gear?
well i would say it had dropped a valve on one of the cylinders,its very hard to say which one but usually if it did it at speed it will have made a bit of a mess in the head.Take each of the spark plugs out and have a look in the spark plug hole on each cylinder with.a small powerful torch and look for bent metal or metal fragments.usually on a v twin its the rear cylinder that suffers as it runs hotter but its not always the way.
Choke cable
Housing and cable must be changed together.
Not finding what you are looking for?