20 Most Recent 2006 Honda VTX 1800 - Page 6 Questions & Answers

I have a copy of the complete user manual; a $8 donation would be helpful.

Hi, The only thing that comes to mind for me is that there is a compatibility mismatch between your alternator and the rest of the car. If the alternator is "overcharging", then that means that is restoring your battery with too much power and the battery compensates by giving off power even when it's not supposed to. Thank you.

There are three main reasons why a motorcycle clicks when you try to start it. The first and most common reason is because of a dead battery. The second reason could be due to a bad starter. The third most common but less likely reason the motorcycle is clicking could be due to a seized engine.

Bore / stroke 66 x 72mm 72 mm stroke, so the difference in bore diameter is 1.5 mm. 72 x 1.5 = 108 cubic Millimetres. Divide by 10 to make it cubic centimetres and the answer is 10.8. Your new engine will be 256.8 cc.

Check for proper adjustment of the clutch.

https://www.powermanuals.com/honda-trx300-trx300fw-service-manual-free-download/

I would get a rebuild kit and do a full strip down and clean. If you don't want to do that, take the throttle cable right off to check it is not pulling. https://www.google.com/search?q=1999+Honda+Shadow+Aero+1100+carburetor+rebuild ..

First, I'm not a Honda mechanic. * Manual (check page 90); http://owners.honda.com/assets/OWNERLINK/model/own_man/powersports/2004/2004_VTX1300C.pdf * Contact your Honda dealer for more info. Aloha, ukeboy57

It could be a defect in your starter motor causing it to draw too much amperage

250 tells my cc, only, the ATV has real name what is it. TRX250???? blown fuse bad wires or connectors kill switch bad ignition switch bad working with no manual or schematic is painful even me. I use a voltmeter and trace the power to all that end to end. has a crank or cam sensor? i see no free manuals not banned for ***** or virus packed. sorry free to find why not just buy the manual and pay $10 and the first hour labor saved pays for the manual 10 times over and call and investment grade book, keeps paying dividends.

Sounds like the battery is flat. Get it on a battery charger. Or bump start it in 2nd gear and give it a good run.

Probly a bulb or fuse or bad connect...its 30yr. Buy a clymer shopbook for that model

that takes skill. the manual covers this, RTM yet? the best way is open hose at the highest point coolant paths. the fill until it is leaks there. air floats up hill is the only magic here,Physics but yes a huge pain on some cars with low hoods. buy honda shop manual and read. most cars have chapter on cooling that show the best way. there are other tricks ask

Help in the link https://www.google.com/search?q=2002+Honda+Fireblade+keeps+blowing+the+10+amp+start+fuse ..

Ugut to go ivr whole bike oiling or wd40. Also turning rusted or froze nuts. Get apropane torch too for loosening. Project junk bikes taketime but theyr classic. Ihave an 81 yama250..bin workn on it almost20yr. New stuf isjunk. Buy a clymer shop manual for that model...its for rebuild

Axle nut is 27mm and the other side is hex head 24mm, this was on a 2002 - it should be the same from 2000 to 2007.

you will most likely have to buy and have programmed 2 keys from a dealer

This is a wild guess. You need a new or rebuilt starter motor. The shaft for the starter motor gear broke and the starter gear is not turning over your engine.

Have you compression tested the bores, do a wet and a dry test.

Question edited for clarity. Fork oil change. http://v4musclebike.com/forums/showthread.php?t=1604 Full rebuild https://www.google.com/search?q=1998+honda+magna+750%2C+add+oil+front+forks ..