Top 20
2000 Harley Davidson FXDWG Dyna Wide Glide Questions & Answers
Brake light comes on when turning the ignition switch on Harley wide glide 2000 @
Hi, Renee before diagnosing any brake light issue always check the bulb and fuse first for integrity a brake light staying on is usually caused by the front brake light switch, which is mechanical, not disengaging. On early models moving the throttle control housing closer to the front brake master cylinder is the main fix. On late models, the switch gets tweaked and needs to be realigned. A brake light that does not come on when the brake lever is applied can be caused by a faulty switch or no continuity in the wiring at the switch. The rear brake light switch is hydraulic and it is extremely rare to malfunction in a closed circuit condition causing the brake light to stay on. Usually, rear brake light switch issues are caused by no brake pedal free play or a sticky rear master cylinder piston. A brake light that does not come on when the rear brake pedal is depressed can be caused by a faulty switch, air contamination in the brake line, or no continuity in the wiring at the switch. Finally, most tail light wiring harnesses run under the rear fender held in place by spot-welded clips. Worn out rear shocks or lowered suspension can bottom out causing the rear tire to come in contact with the wiring harness, rubbing the insulation off, exposing the bare metal inner core, allowing it to break or short out.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at
[email protected]. Good luck and have a wonderful day.
https://www.youtube.com/watch?v=2Nr8KEgoDfM
http://www.mediafire.com/file/l8mk1291i3fiprh/2000_Harley_FXD_Servive_Manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://mybikemanuals.com/harley-davidson/harley-davidson-dyna-glide-owners-manuals/
https://www.6ya.com/
Why my bike shoots flames out the pipes
You likely have one or two fouled spark plugs (especially if you went riding in high altitudes). It is also possible that your timing is off, likely retarded. Your timing chain may have jumped a knotch, or may just be too slack.
Im a fuel issue how do change the float iN MY my stock cARBUERATOR
take off the air filter then take off the carb then turn it upside down and undo the float bowl then slide the float needle pivot pin out sideways lift it out and swap it for your new one,its not common for a float to fail though ive only ever seen two leak and stop floating in 23 years.why do you think its a problem with the float.
Is it normal to find white stuff at bottom of gas tank
ABSOLUTELY NOT. You have somehow gotten a fuel contaminant in your tank.
I would recommend removing all fuel from your tank, flushing the tank (getting rid of all the "white stuff"), and replacing the fuel. If possible, avoid using ethanol blend fuel in your bike (it is not designed to deal well with it, and it can cause issues).
Not finding what you are looking for?