20 Most Recent
1971 Laverda 750 S Questions & Answers
1998 problems with laverda 750s why does my bike
The most common complaints are the poor gas mileage, weak electric starter, not as fast off the line as the Japanese bikes, slower top end speed, top heavy and not a good commuter bike. Additionally, dealers are few and far between. Install new spark plugs, clean the air filter, clean or at least drain the carbs to remove any water in the float bowls. Do a compression check to see if the valves need to be re-seated.
I own a Laverda 750sf 1971 and need to know if it
All late 60's and 70's Laverda 750 twins are negative earth.
Buy the 'Green Book' ISBN-13:
978-0-9796891-0-9 - do not pay more than the cover price inc post.
For parts try Slaters or Motal in the UK. I buy from Laverda Paradies in Germany, does what it says on the tin - every time.
http://www.laverda-paradies.de
For info try http://www.laverdamania.net/menugb.htm and
http://www.iloc.co.uk/
I own a 2003 laverda 750S. I battle to get it
how good is the battery check terminals are clean leads and all conections are good try remote battery and jump start it like a car if the problem goes away its your battery if not its the starter or solinoid or leads
750S (1997) lugage systems
Saddle Bags and a tank bag. I use RKA products which are excellent and have been using the same ones for a few years.,
I have a 1994 Laverda 668 that wont start when hot?
one possible cause is that you dont have the correct clearances for the valves, if there is not enough clearance, once the engine gets hot and the valve expand, they can hold the valves open (usualy the exhaust valve)... this would cause low compression when hot making it hard to start.
hope it helps
Were do the fuel lines go to on a mountop 150cc
This particular unit has a typical GY6-style engine with a fuel line designated from the gas tank to the carburetor distinguished by an in-line cylindrical fuel filter located near the center of the line. Best to locate the carburetor distinguished by the location of the air filter, there should be a hose going from that unit up into the gas tank.
Ideally, remove the gas tank entirely and it should reveal the gasoline lines directly to the carburetor.
The photo shows the fuel line/filter indicated in red, and the location of the carburetor within the blue indicator.
2/28/2024 4:42:51 PM •
Motorcycles
•
Answered
on Feb 28, 2024
Cleaned my carburetors and the Jets and now my bike won't start. I have a spark but it won't start.
All questions need FULL 'year make model', as the first 3 words.
Then there are 10,000 categories listed by 'make year model'.
So we are working blind.
Make sure gasoline is being delivered to the carbs by removing the fuel delivery pipe.
Carbs come in different systems. If it has a float bowl on the bottom, tap it with the handle of a screwdriver as it may be stuck.
Turn the engine over. If it doesn't start, remove the spark plug and see if it is wet with gas?
You need three things for an engine to start
Clean gas
A spark at the right time
Compression
You have one thing missing
//
2/21/2024 6:59:48 PM •
Motorcycles
•
Answered
on Feb 21, 2024
Not finding what you are looking for?