20 Most Recent 2003 Kymco Stryker 125 Questions & Answers


Replacing CDI unit for a power CDI unit and Replacing exhaust for a performance exhaust it will increase the power.

2003 Kymco... | Answered on May 26, 2012


Look and see if you left a wire disconnected when you installed the battery.
Look around the positive pole........

2003 Kymco... | Answered on Feb 23, 2011


Hi, Ian for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://tirepressure.com/kymco-stryker-motorcycle-tire-pressure
https://www.louis-moto.co.uk/rund-ums-motorrad/bike-datenbank/kymco-stryker-125-i-ii/af/2006
Kymco Stryker 125 150 Service Repair Manual Download Download Manuals... $15
https://www.bike-parts-kymco.uk/kymco-motorcycle/125-MOTORCYCLE/STRYKER/STRYKER_125_4T/111
KYMCO Stryker 125 User Manual

Kymco Stryker... | Answered on May 04, 2019


You probably need a new clutch. That can explain why it bogs. The smoke I don't know.

Kymco Stryker... | Answered on May 31, 2016


did you replace the whole indictator assemblies or the bulbs and are they l.e.d indicators you have on it now and was it using l.e.d ones originally

Kymco Stryker... | Answered on Jan 16, 2015


Try changing the spark plug first and clean the air filter.

Kymco Stryker... | Answered on Apr 14, 2014


Bad ground. Find the fault and fix it.

Kymco Stryker... | Answered on Oct 24, 2013


Hi Bryan, it does sound like the battery, if it is a 12 Volt system, just connect a set of jumper leads from a 12 Volt battery, another bike car etc. and see if it makes a difference, i think you will find everything works fine with a new battery.

Kymco Stryker... | Answered on Mar 30, 2011


weak spark can indicate bad coil,,,correded wires,,,or grounding of the ignition circut,,in which case you would have No spark,,,simple things first,,,check your wired to the plugs,,some have removable plug caps,,and many times,,corression interferes with strong spark,,,coil testing must be done at a service provider,,,wires can be grounded,,expically if you have dumped the bike and the handle bars have be dissloged somewhat,,,check the kill switch for damage inside..

Kymco Stryker... | Answered on Mar 12, 2011


dat kan je cdi zijn of condesator als je contact punten hebt ik weet niet of er een typ key er op zit m.v.g jasper

Kymco Stryker... | Answered on Feb 18, 2011


if 2 stroke then = all the way in and out 3/4 turn
if 4 stroke then = all the way in and out 2 turns

Kymco Stryker... | Answered on Nov 30, 2010


is the batt at 12v--are connections tite n no corrosion-the same goes for the wiring--is gas circulating to the motor--may need a repair book

Kymco Stryker... | Answered on Aug 28, 2010

Not finding what you are looking for?
2003 Kymco Stryker 125 Logo

Popular Tags

5 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5856 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Stryker 125 Kymco

  • Stryker 125 Kymco

Most Popular Question

doesnt start

  • Motorcycles
Loading...