20 Most Recent
2008 Keeway Outlook 150 - Page 5 Questions & Answers
Cleaned my carburetors and the Jets and now my bike won't start. I have a spark but it won't start.
All questions need FULL 'year make model', as the first 3 words.
Then there are 10,000 categories listed by 'make year model'.
So we are working blind.
Make sure gasoline is being delivered to the carbs by removing the fuel delivery pipe.
Carbs come in different systems. If it has a float bowl on the bottom, tap it with the handle of a screwdriver as it may be stuck.
Turn the engine over. If it doesn't start, remove the spark plug and see if it is wet with gas?
You need three things for an engine to start
Clean gas
A spark at the right time
Compression
You have one thing missing
//
2/21/2024 6:59:48 PM •
Motorcycles
•
Answered
on Feb 21, 2024
How do I reset 2007 Victory Vegas 8 ball petrol sensor please.
To reset you need to follow this steps below
1.Turn the ignition switch to the "On"position
2.press and hold the trip reset button on the dashboard until the fuel gauge reset or blinks
3.Release the trip reset button
4.Start the engine and let it run for a few minutes to allow the sensor to recalibrate
5.Turn the engine off and then restart it to ensure the reset was successful
2/8/2024 6:39:37 AM •
Motorcycles
•
Answered
on Feb 08, 2024
How can I get my E bike to run 28 MPH versus the default speed?
Tip #3: Swap your motorYou'll simply want to source a motor that has a higher KV or RPM rating than your current motor. For example, if you have a 48V e-bike that travels at about 20 mph (32 km/h), you can swap on this hub motor and reach speeds closer to 28-30 mph (45-48 km/h).
Aug 1, 2018
..
1/9/2024 4:32:51 AM •
Motorcycles
•
Answered
on Jan 09, 2024
I need a left rear motor and hex plate for a lil rider model 80-901. where can it be bought?
Finding specific replacement parts for toys like the Lil Rider model 80-901 can sometimes be challenging, especially if they are older models or from lesser-known manufacturers. Here are a few steps you can take:
1. **Manufacturer's Website:** Check if Lil Rider has an official website or customer support contact. They might offer replacement parts or guidance on where to find them.
2. **Online Marketplaces:** Websites like eBay, Amazon, or specialty toy parts websites sometimes carry replacement parts for various toy models. Search using specific keywords like "Lil Rider 80-901 left rear motor" or "hex plate replacement."
3. **Toy Repair Shops:** Local toy repair shops or hobbyist stores might have or be able to source such replacement parts. They often have connections or knowledge about where to find specific components.
4. **Contact Retailers:** Reach out to retailers that sell Lil Rider products. Even if they don't have the part in stock, they might be able to order it for you or provide information on where to find it.
5. **Forums and Online Communities:** Sometimes, enthusiasts or hobbyists who work with similar toys might offer advice or know where to find rare parts. Websites or forums dedicated to toy enthusiasts could be helpful.
6. **Consider Alternatives:** If the exact part isn't available, exploring alternative components that might serve a similar function could be an option. However, this might require some modification or adaptation.
Remember, when searching for replacement parts, providing as much detail as possible about the part needed, including measurements, model numbers, or any identifiable markings, can increase the chances of finding the correct component.
1/2/2024 6:55:30 PM •
Motorcycles
•
Answered
on Jan 02, 2024
How to remove filter and clean it?
Year Make Model of the motorcycle please?
Please always include that information as first three words. Then they are thousands of motorcycle categories listed by;
make year model = Suzuki 2003 GSXR1100
If it is the foam type filter, put Dawn Dish Detergent on it, wash out the dirt, dust and oil. Keep squeezing under running water until the water runs clean. Leave to dry. Then spray it with Oil Filter Oil and replace the filter. For paper filters, just replace them if they look dirty.
99-0516 K&N Air Filter Oil - 12.25oz - Aerosol
K&N
https://www.knfilters.ca > 99-0516-air-filter-oil-12-25...
K&N 99-0516 is a 12.25 ounce aerosol can of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton ...
US$15.99 · In stock
..
12/12/2023 11:42:00 PM •
Motorcycles
•
Answered
on Dec 12, 2023
Is both wires n the plug the same on voltage regulator
In a voltage regulator plug, the wires may not necessarily carry the same voltage. The voltage regulator is a component in a vehicle's electrical system that controls and regulates the voltage produced by the alternator, ensuring a consistent voltage output to the battery and other electrical components.
In the plug of a voltage regulator, there are typically multiple wires, each serving different purposes and carrying different voltages. For instance:
1. **Voltage Input and Output Wires:** These wires might differ in voltage. The input wire connects to the alternator or battery, carrying the higher voltage that needs regulation. The output wire, connected to the electrical system, carries the regulated voltage for the vehicle's operation.
2. **Ground Wire:** This wire is crucial for completing the circuit and ensuring proper functioning of the voltage regulator. It does not typically carry a voltage; instead, it serves as the return path for the electrical current.
3. **Sensing Wire:** In some regulators, there might be a sensing wire that monitors the system voltage. This wire doesn't usually carry a high voltage but rather acts as a feedback mechanism for the regulator to adjust its output.
It's important to identify and understand the wiring configuration of the voltage regulator plug, as incorrect connections or wiring can lead to electrical issues or even damage to the vehicle's electrical system. Referencing the vehicle's service manual or wiring diagrams specific to the make and model can provide accurate information about the voltage levels and the purpose of each wire in the voltage regulator plug.
12/10/2023 4:28:15 AM •
Motorcycles
•
Answered
on Dec 10, 2023
Not finding what you are looking for?