20 Most Recent
1989 Husqvarna AE 430 Questions & Answers
My husky is an automatic and it does not shift into drive anymore
You may have broken a clutch spring. Husky automatics use 3 springs for each of the 3 gears. Each spring controls a clutch shoe. A broken spring would prevent you from engaging a gear and causes other mischief inside the case. You should remove the left case cover and inspect. Halls Husqvarna has parts catalogs for almost every year. Thumpertalk.com has a discussion thread on this problem.
Transmission oil
Over here in New Zealand the factory oil - Esso Univis J26 - is unobtainable so we use Mobil HFA. It is an aircraft hydraulic oil but chemical tests have shown that it is the same as the Esso product.
Lube in the crankcase/trans?
exxon univis J-26 which is called for on the card which comes with the bike origionally. I am on my second 5 gallon pail which I had to fine an exxon distributor to special order for me.
2006 Husqvarna TE-610 only has intermittent spark one.
If you have already replaced the flywheel, stator, and CDI, the next step would be to check the ignition coil and spark plug. It is possible that the ignition coil is faulty and needs to be replaced. Check the spark plug for any damage or wear and replace it if necessary. Additionally, make sure all the wiring connections are secure and free of corrosion.
If none of these steps fix the issue, it may be best to take the bike to a mechanic or dealer for further diagnosis. They may be able to identify any other potential problems that could be causing the intermittent spark issue.
3/5/2023 9:12:58 AM •
Husqvarna...
•
Answered
on Mar 05, 2023
K970 won't start after rebuild
My first thought is that is the primer bulb in the right way round as effectively, it is a one way valve New bulbs also fail to work properly. I reckon that is why they come in packs of 10 :>D Take it off, connect it to fuel and make sure it pumps.
Also please note that we are not Husqvarna, we just have the category for easy filing.
11/29/2021 11:01:56 PM •
Husqvarna...
•
Answered
on Nov 29, 2021
Husky wr 250 wiring diagrams 1995 model
Most likely it will be the stater. And they are pricey. Coils hardly ever go bad or the only other thing that would cause a no spark problem could be the kill button. I hate to say it, but i think it will be the stater.
4/2/2019 12:32:00 PM •
Husqvarna...
•
Answered
on Apr 02, 2019
Husqvarna Z turn changed the rectifier and the battery and something is still killing the battery
Ok.. The rectifier only changes AC voltage to DC voltage.. the voltage to charge the battery comes from the generator.
With the engine running at half throttle+, and IN NEUTRAL, check the voltage at the battery terminals it should be 13 volts +. If you are not getting at least that much.. make sure all connections are tight.. if its less than 13V..... more checking is indicated. (Shop time)..sorry...
6/13/2017 11:52:58 PM •
Husqvarna...
•
Answered
on Jun 13, 2017
Not finding what you are looking for?