20 Most Recent 2008 Buell 1125R - Page 3 Questions & Answers

I would say it sound like its in the control on the handel bars. Take a water squrt bottol and try different areas and see it you can locate the problem area.

If this model has a adjustment, remove seat and install with a higher bracket.

May I suggest a trip to your local library. Cycle repair books should be in 646 stacks of reference.

check out badweatherbikers.com you will find everything you need about working on your Buell.

Try simply pushing on the plug at the display housing. Sometimes just one "bad" connection can lead to strange happenings.With the bike being so new why not just take it back to dealer?

When pouring in new coolant, motor running, cap off, slowly pour in coolant while burping the radiator hose. Will take about 5-10 minutes to complete

Mounting and balancing tires requires special tools. I would find another shop.

The Expansion tank is under the rh radiator pod, need to undo at least 6 bolts to get cover off to access the bottle and to top up the antifreeze

i have had mine 135 and still had 5th and 6th gear to go. I think its got 160 in it but i dont have the jewels to try.

think it's in case of an accident. when bike is on it's side it will cut off the throttle action so nothing (you) won't get stuck between the wheel sprocket/belt.,,

Its possible. also possible that you just have a buse fuse going bad. Try changeing the big black fuses. They dont cost much and go bad often.

Have the battery "load checked". Check the starting circuit thouroughly.

Google search for buell factory service manual

Yes,There is a ongoing problem with the STATOR on the 1125r. It needs to be replaced - I would get it redone or a new one from EBR(erikbuellracing). No if ands or but's about it.

Do you have the correct key? If so - squirt some wd40 in the lock and run the key in and out of the lock a dozen times to loosen things up then try again.

The process is in your owners manual and is VERY straightforward. If you don't know how to remove and reinstall the battery have a trained serviceman take care of it for you.

Yes, follow it down to the fairing and find which bolts on the back side of the fairing are loose and tighten them.