Top 20 2010 yuki 250 Darker - Page 6 Questions & Answers

0helpful
1answer

Max110 mirror when flipping around will no long hold in place. it has been working untill today

IT IS NOT A CAR. IT IS A MOTORYCYCLE OF SOME KIND 110 CC, IS SMALL. THE MIRROR IS BAD. BUY A NEW ONE AT THE MAX DEALER. IN YOUR SECRET COUNTRY GOOGLE HINTS OF THIS MC Honest Motor Forza Max 110cc Cub Motorcycle GSM Moto 110cc Tunisia Market
5/19/2023 7:45:41 PM • Motorcycles • 31 views • 0 helpful votes
0helpful
1answer
1helpful
2answers

Hi I have a aprilla sport city 125 the problem is that while the Bick is running the battery does not charge

Its better u take it to a motorcycle service, they can check the voltage that the scooter produces to charge the battery, maybe its the regulator or the magnetic field.
1/13/2023 9:48:37 PM • Motorcycles • 755 views • 1 helpful votes
0helpful
1answer

Mio Soul i 125 rear axle nut tightening torque value

The tightening torque value for the rear wheel nut of a Yamaha Mio Soul i 125 motorcycle is typically around 70-80 Nm (Newton meter). This torque value is the amount of force required to tighten the nut to the proper level. It's important to use a torque wrench to tighten the nut, this will ensure that the nut is tightened to the proper torque level without over tightening it, which can cause damage to the threads or the hub. It's also important to note that the torque value may vary depending on the specific model and year of the motorcycle, so it is best to consult the owner's manual or the manufacturer's website for the specific torque value for your motorcycle. It's also important to check the torque every time you change a tire or make any adjustment to the wheels, to ensure that the wheels are properly secured and to prevent accidents or damage to the motorcycle.
1/24/2023 3:57:28 AM • Motorcycles • 537 views • 0 helpful votes
0helpful
1answer

How's it my RHCM start button has stopped working can I bypass that to start bike

Don't bypass it, replace it! If you bypass it the starter motor will run all the time damaging the starter motor and other parts inside the transmission. Switches are normally reasonably cheap to buy and some of the Non dealer parts are just as good.
5/10/2023 11:01:11 AM • Motorcycles • 33 views • 0 helpful votes
0helpful
1answer

How do I match up my ignition switch to my wiring harness when the colors are different on my 1500 motorcycle classic Vulcan

Just do a continuity test on wires and tie in and ad wire if needed..
4/20/2023 4:36:26 AM • Motorcycles • 50 views • 0 helpful votes
0helpful
2answers

Saan ang chases number ng wave 100

Philipino to ENGLISH: Where is the chase number of wave 100 Do you mean the 'Chassis number'. We only speak English here. Showing results for Where is the chassis number of wave 100. Search instead for Where is the chase number of wave 100. Location of chassis number of Honda Wave 100 Locate the 17-digit Vehicle Identification Number (VIN) printed on the frame of your Honda motorcycle. This is often stamped onto the right side of the steering head, where the front fork is mounted on the frame. The VIN is also imprinted on a metal tag located on the left side of the frame above the motor.

Honda Motorcycles Model Prefix - VIN Number

https://www.motorcyclespareparts.eu > ... > Honda Parts Search for: Location of chassis number of Honda Wave 100 ..
3/13/2023 8:31:45 PM • Motorcycles • 120 views • 0 helpful votes
0helpful
1answer
0helpful
1answer

Hi there I have a 450yzf raptor and when I go to start it. It sounds like it's not catching it jus keeps winding out?

Sounds like possibly the starter bendix drive is bad.
4/10/2023 1:03:02 AM • Motorcycles • 52 views • 0 helpful votes
1helpful
1answer

My piaggo zip 70s kit will not start

There are several potential reasons why your Piaggio Zip 70s scooter may not be starting. Some common causes include:
  1. Dead battery: Make sure that the battery is charged and in good working condition.
  2. Faulty spark plug: Check the spark plug and replace it if it is dirty or worn.
  3. Clogged fuel filter: A clogged fuel filter can prevent fuel from reaching the engine.
  4. Air filter: The air filter can be clogged, restricting airflow to the engine.
  5. Poor compression: If the compression in the engine is low, it may not start.
It is difficult to determine the exact cause without more information or a proper diagnosis. The best course of action would be to refer to the manufacturer's manual or seek help from a qualified mechanic who can inspect and diagnose the problem.
1/15/2023 9:48:23 PM • Motorcycles • 435 views • 1 helpful votes
0helpful
1answer

What do the 2 wrenches on the dash mean?

It's a service/maintenance reminder.
5/1/2023 9:11:49 PM • Motorcycles • 30 views • 0 helpful votes
1helpful
1answer

Broken stand on my Quicksilver trolly/backpack. Can I buy new wheels/stand to fix on?

ck this site.... https://vxb.com/products/1-pair-of-travel-bag-replacement-luggage-wheels-1?variant=43582765596907₪cy=USD&tm=tt&ap=gads&aaid=adaxXEtq4CiMg
4/13/2023 12:11:30 PM • Motorcycles • 43 views • 1 helpful votes
0helpful
1answer

Hi, I hope someone on here can help me I have a GY6 engine.

Question edited for clarity. Question moved to Motorcycles. It sounds like it is part of the Positive Crankcase Ventilation System, also known as a Breather Hose. https://www.google.com/search?q=gy6+crankcase+breather+hose It would be better to know 'year make model', rather than just the engine type. ..
4/20/2023 4:43:28 PM • Motorcycles • 35 views • 0 helpful votes
0helpful
1answer

I cleaned the carbs out the bike starts an as soon as i give it a bit of throttle the bikes stalls any suggestion

All questions need FULL 'year make model' as first 3 words. Plus there are 10,000 categories by 'make year model'. It is either fuel supply, the main jet is blocked, or is the case of a vacuum diaphragm carb the diaphragm is split.
3/8/2023 7:00:52 PM • Motorcycles • 95 views • 0 helpful votes
1helpful
1answer

What is the wire running up the hood hinge on the passenger side of a 2004 jeep grand Cherokee Laredo

It is difficult to determine the exact purpose of the wire you are describing without a visual inspection of your vehicle, but it is possible that it is a ground wire for the hood light. Some vehicles have a hood light that illuminates the engine compartment when the hood is opened, and this light may require a ground wire to function properly. However, without more information or a visual inspection, it is impossible to say for certain what the wire is for.
2/14/2023 4:01:51 AM • Motorcycles • 155 views • 1 helpful votes
0helpful
1answer

Is the choke on or off if the lever is up on my 1994 virago

The Owner Manual refers to this on Page 21. Starter (choke) lever Starting a cold engine requires a richer air-fuel mixture, which is supplied by the starter (choke). Move the lever in direction a to turn on the starter (choke). Move the lever in direction b to turn off the starter (choke) Down for 'On', and Up for 'Off'. https://www.manualslib.com/manual/612332/Yamaha-Virago-Xv535.html?page=21&term=Starter+Choke+Lever&selected=1#manual ..
4/12/2023 7:50:48 AM • Motorcycles • 37 views • 0 helpful votes
0helpful
1answer

Overheating of the Bike and it won't start until the Bike cools off.

Question edited from street talk to normal English. Fill up the coolant on your mystery motorcycle, get rid of airlocks, make sure the water pump is working and the thermostat is not jammed shut. All question need FULL 'year make model'.
3/30/2023 5:22:00 PM • Motorcycles • 44 views • 0 helpful votes
Not finding what you are looking for?
2010 yuki 250 Darker Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top yuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a yuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Road Star S yuki

  • Road Star S yuki

Most Popular Question

good makes yuki

  • Motorcycles
Loading...