Top 20
2010 Keeway Outlook 150 Questions & Answers
Reheating
My good friend Rafael, the first thing you have to have in mind is that your scooter, with only 90 miles on it, is still under warranty and you should take it to the dealer responsible for such problem. If not you should check if the cooling fan is running at a reasonable high temperature, if not check the thermal switch that activates the fan and replace it if necessary. Also you should check if the water pump is working, see if there is water running inside the radiator while the engine is running when the engine is cold to avoid hot water burns. If you can't solve the problem with this you need to tune in your engine. I hope this suggestions help you solve the overheating problem on your Outlook
How much tire pressur for outlook keeway
The Keeway outlook 150 model 2012 owners manual recommends a pressure for both tires of 280 kPa (Kilo-Pascals) which means 40.61 pounds per square inch. However, I have a service manual that recommends 225 kPa which means 32.63 Pounds per square inch. I personally like high pressure (280 kPa) in my tires because the scooter feels more docile. I hope this answer fits you well.
Was riding down road just
chec plug cables for flaws-they wear inside--inspec other parts of ign system the same--look at fuel delivery-from tank to carb-get a shop manual online
Keeway fact 50 2008 just turns over but not starting
What exactly is it doing when you try to start it? A slow, lazy start is commonly a low charged or weak battery. Just spinning and not trying to start is often a 'No Spark' issue. Turning, trying to start but stalling out is usually a fuel supply problem.
11/8/2023 2:16:51 AM •
Keeway...
•
38 views • 0 helpful votes
Im looking for a diagram to where the fuel lines go on a 2014 tx125 Keeway motorcycle
I don't have specific information on a 2014 Keeway TX125 motorcycle. However, I can provide you with some general information about fuel lines in motorcycles.
The fuel lines in a motorcycle connect the fuel tank to the carburetor or fuel injector. They carry fuel from the tank to the engine, allowing the combustion process to take place. The fuel lines are typically made of rubber or plastic, and they can become brittle and cracked over time, leading to leaks.
In most motorcycles, there are two fuel lines: one for fuel delivery and another for fuel return. The fuel delivery line carries fuel from the tank to the carburetor or fuel injector, while the fuel return line carries excess fuel back to the tank. The fuel return line helps to regulate fuel pressure and prevent vapor lock.
It's important to make sure that the fuel lines in your motorcycle are properly connected and in good condition. A fuel leak can be dangerous and cause damage to your motorcycle. If you're not sure how to properly connect the fuel lines on your Keeway TX125, I would recommend consulting the motorcycle's owner's manual or taking it to a certified mechanic for assistance.
11/28/2022 10:35:52 AM •
Keeway...
•
84 views • 0 helpful votes
Keeway 200 Superlight no brake light
Hi, be carefull red lights are always a sighn of trouble !!!
in your case please check the wiring connection at the oil pressure gauge (usualy in the front of crankcase ) As for the tail bake light, also check wiring connections at the brake pedal switch and front brake switch ( under brake lever) Also check bulb. It will bea good idea to spresd som wd40 all over the electrical connections . Hope this helps
11/3/2017 3:28:52 AM •
Keeway...
•
810 views • 0 helpful votes
Not finding what you are looking for?