20 Most Recent 2009 Yamaha V Star 1300 Tourer Questions & Answers


Hi, Joshua for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.reddit.com/r/motorcycles/comments/83h58f/yamaha_vstar_1300_seat_removal
Removing Road Star Seat
Yamaha XVS1300A 2007 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
https://dd5394a0b8ca8e97ba29-abf76f3d91a2125517d6c7c409f095c7.ssl.cf1.rackcdn.com/content/common/manuals/2008/LIT-11626-21-30_VStar1300Tourer_1476.pdf

2009 Yamaha V... | Answered on Apr 27, 2019


Hi, Joe-Chivo for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Repair Yamaha Star Speedometer Odometer Not Working
How To Calibrate Motorcycle Speedometer
Yamaha XVS1300A 2007 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
YAMAHA XVS1300A Owner Manual

2009 Yamaha V... | Answered on Jul 21, 2018


Hi, Lovelyfuture for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha Star 1100 battery
Yamaha 650 Star Needs New Battery
Yamaha XVS1100 Service Manual
OEM parts for Yamaha
YAMAHA XVS1100 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



2009 Yamaha V... | Answered on May 18, 2017


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Motorcycle Message Board Motorcycle USA
Adjusting shift lever motorcycles
Yamaha XVS1300A 2007 Service Manual
OEM parts for Yamaha
YAMAHA XVS1300A Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2009 Yamaha V... | Answered on May 05, 2017


Hi, Johnny for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha 1300 Tourer Yamaha 1300 Tourer Fansite
2007 Yamaha Star 1300 Motorcycle Exhaust Modifcation
http://vstar1300.pbworks.com/w/file/fetch/94628933/1300VStarServiceManual.pdf
OEM parts for Yamaha
Yamaha 2009 XVS1300AY Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2009 Yamaha V... | Answered on Apr 03, 2017


Hi, Hal belt squeaking or chirping or buzzing or singing are sounds that make up the orchestra of "Belt Music" these noises are caused by a variety of conditions that can usually be corrected ie. belt tension too loose, swing arm alignment no true, warped or loose sprockets and bent sprocket guards, but the majority of music is mainly caused by miles and miles of heat build up from the engine, transmission, and sprockets transferring that heat to the drive belt, and over time the sides of the belt will become crystallized/glazed into a finish that is harder than "Chicken Lips" and everyone knows that "Chicken Lips" are harder than diamonds. This is the reason your brakes squeak. There are many home remedies out there, fan belt spray, rubbing a bar of soap on the sides, Dupont Teflon Lubricant, grease, silicone spray, WD-40 etc. etc. these are no more than Band-Aids and the noise just comes back in a couple of days, You must remove the "Chicken Lips" The first and most important thing you can do are align the belt in the sprockets so that it tracks dead center not rubbing up against the sprocket guard this may require using shims on the front and rear sprockets, while the belt is off, check the teeth for being broken-cracked-missing, check the sprockets for having square teeth instead of rounded teeth, if any of these conditions exist, replace the belt and both sprockets. If everything looks ok then place the belt on its side and with a drill or die grinder install a 2-3 inch velcro sanding pad with a ScotchBrite disc, gently dust both sides of the belt to remove the shiny crystallized glaze the surface will become dull once the fresh material is exposed. Reinstall the shimmed sprockets and reconditioned belt and adjust the tension with no rider on board to 5/16-3/8" up and down with 10lbs. of force, I have had excellent results with this method and it is cheaper than buying a $300 new belt. Again the key to this procedure is "BELT ALIGNMENT" you need to keep the sides of the belt away from the sprocket guards.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Squeak Chirp 950 Star Yamaha Star Forum
Yamaha 1300 Tourer Yamaha 1300 Tourer Fansite
Yamaha XVS1300A 2007 Service Manual
OEM parts for Yamaha
YAMAHA XVS1300A Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2009 Yamaha V... | Answered on Mar 20, 2017


Hi, Anonymous belt squeaking or chirping or buzzing or singing are sounds that make up the orchestra of "Belt Music" these noises are caused by a variety of conditions that can usually be corrected ie. belt tension too loose, swing arm alignment no true, warped or loose sprockets and bent sprocket guards, but the majority of music is mainly caused by miles and miles of heat build up from the engine, transmission, and sprockets transferring that heat to the drive belt, and over time the sides of the belt will become crystallized/glazed into a finish that is harder than "Chicken Lips" and everyone knows that "Chicken Lips" are harder than diamonds. This is the reason your brakes squeak. There are many home remedies out there, fan belt spray, rubbing a bar of soap on the sides, Dupont Teflon Lubricant, grease, silicone spray, WD-40 etc. etc. these are no more than Band-Aids and the noise just comes back in a couple of days, You must remove the "Chicken Lips" The first and most important thing you can do are align the belt in the sprockets so that it tracks dead center not rubbing up against the sprocket guard this may require using shims on the front and rear sprockets, while the belt is off, check the teeth for being broken-cracked-missing, check the sprockets for having square teeth instead of rounded teeth, if any of these conditions exist, replace the belt and both sprockets. If everything looks ok then place the belt on its side and with a drill or die grinder install a 2-3 inch velcro sanding pad with a ScotchBrite disc, gently dust both sides of the belt to remove the shiny crystallized glaze the surface will become dull once the fresh material is exposed. Reinstall the shimmed sprockets and reconditioned belt and adjust the tension with no rider on board to 5/16-3/8" up and down with 10lbs. of force, I have had excellent results with this method and it is cheaper than buying a $300 new belt. Again the key to this procedure is "BELT ALIGNMENT" you need to keep the sides of the belt away from the sprocket guards.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha 1300 Tourer Yamaha 1300 Tourer Fansite
950 Rear wheel chirp
Yamaha XVS1300A 2007 Service Manual
OEM parts for Yamaha
Yamaha XVS13AF Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2009 Yamaha V... | Answered on Mar 20, 2017


Hi, Johnny for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.motorcycleforum.com/97-yamaha/94502-upgrading-exhaust-yamaha-v-star-1300-a.html
http://www.msgroup.org/forums/mtt/topic.asp?TOPIC_ID=8805
Yamaha XVS1300A 2007 Service Manual
OEM parts for Yamaha
YAMAHA XVS1300A Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2009 Yamaha V... | Answered on Feb 19, 2017


Hi, Snakeman_982 the carburetor throttle shaft wheel has two cables the cable closest to the right side of the bike is the throttle cable and the one closest to the left side is the idle cable. Right about the middle between the two is the idle adjustment bolt it faces out towards the air filter end of the carb . The engine should be at operating temperature with the enrichener off to set the idle between 950-1050 rpm. Turn the idle adjustment bolt clockwise to increases idle speed and counterclockwise to decrease idle speed. If you have access to your air fuel mixture bolt you may adjust it as well if not there is a video below on how to gain access, make sure you start with clean or new spark plugs. Gently turn the air fuel mixture bolt clockwise until it starts to bottom out "STOP" do not over tighten as it will damage the taper on the end, now back it out 2 full turns to establish a starting point start the engine and check the idle rpm's and adjust the idle adjustment bolt accordingly for 950-1050 rpm if necessary, adjust the air fuel mixture bolt 1/4 turn at a time and let the engine settle for about 10 seconds, clockwise for a leaner mixture and counterclockwise for a richer mixture you are seeking the highest rpm your air fuel mixture bolt can acquire without going past 3 full turns from bottom then readjusting the idle adjustment bolt back down to 950-1050 rpm If you can not detect any rpm change and can not stall the engine by turning the air-fuel mixture bolt all the way in then your pilot/low-speed jet is too big. Final adjustment should be made with a clean air filter mounted to the carburetor. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Erratic idle so confused Yamaha Star Forum
http://www.starbikeforums.com/forums/49-v-star/9084-v-star-acting-very-sluggish-sputtering.html
Yamaha XVS1300A 2007 Service Manual
OEM parts for Yamaha
YAMAHA XVS1300A Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2009 Yamaha V... | Answered on Feb 03, 2017


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Re Road Star Seat Removal Road Star Forum Yamaha Road Star
Yamaha Star 650 Remove Seat Rear Fender
Yamaha XVS1300A 2007 Service Manual
OEM parts for Yamaha
YAMAHA XVS1300A Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2009 Yamaha V... | Answered on Nov 17, 2016


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Re Road Star Seat Removal Road Star Forum Yamaha Road Star
Yamaha Star 1100 battery
http://vstar1300.pbworks.com/w/file/fetch/94628933/1300VStarServiceManual.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2008/lit-11626-21-30_vstar1300tourer_1476.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2009 Yamaha V... | Answered on Oct 29, 2016


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha 1300 Tourer Yamaha 1300 Tourer Fansite
Yamaha Fault Codes motorcycle manuals
http://vstar1300.pbworks.com/w/file/fetch/94628933/1300VStarServiceManual.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2008/lit-11626-21-30_vstar1300tourer_1476.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2009 Yamaha V... | Answered on Oct 10, 2016


top up, let run a while with cap off should clear any trapped air, then top back up if required.

2009 Yamaha V... | Answered on Sep 07, 2014


Sounds like you may have a faulty ignition switch,key cylinder,..which is pretty common with these bikes.

2009 Yamaha V... | Answered on Aug 30, 2012


The battery is probably old and cannot hold a charge anymore. New batteries are relatively cheap. Try buying a new battery, folow the instructions to the letter, and you should have no problems anymore.

Yamaha Ark AC... | Answered on Jun 30, 2011


Hi, William all bulbs must be 6-volts, for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Hyosung, despair not, for a mere $20 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=6-volt+turn+signal+bulb+1972+Yamaha+LT2+100&source=univ&tbm=shop&tbo=u&sa=X&ved=0ahUKEwjEvf2SnJzlAhXOtVkKHZxWCPUQsxgILw&biw=1440&bih=757
https://www.jpcycles.com/motorcycle-taillight-and-turn-signal-bulbs/6-volt
https://www.repairmanuals.co/products/yamaha-motorcycle-repair-service-manual-choose-your-motorcycle-instant-access?cmp_id=992550392&adg_id=47921554743&kwd=&device=c&gclid=EAIaIQobChMIs9mqr5yc5QIVAeiGCh3zDwbeEAQYAiABEgIC5fD_BwE $20
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha/

Yamaha... | Answered 15 hours ago


Hi, Zakaria the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts enquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.thisoldtractor.com/mg_manuals/book_motorcycle_identification.pdf

Yamaha... | Answered 3 days ago


Hi, Douglas external oil deposits fall into 3 categories:
1. WEEPAGE is the oil that is sweated pass gaskets, seals, o-rings, and crankcase seams, it's covered by dry dust and is normal for older engines with lots of miles, no repair is necessary.
2. SEEPAGE is the same as weepage except the deposit is wet and confines itself to a specific area, the repair is optional depending on the owner's cleanliness criteria, the deposit location and the weight of his bag of "DRACHMA"
3. LEAKAGE is the same as seepage except it is enough to drop to the ground leaving a spot. Repair as necessary.
To find the source of your oil leak, start at the point where you see oil and trace its path going up and forward, blowing baby powder from the palm of your hand will help in those difficult to see areas if there is too much oil present then buy a spray can of engine degreaser apply it to the affected area then rinse off with a pressure wand or garden hose, use compressed air to blow off excess water or just let it drip dry, take your bike for a 15 minute ride and check for the leak.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://mechanics.stackexchange.com/questions/5785/how-to-find-and-fix-an-oil-leak-on-a-yamaha-scooter
https://www.youtube.com/watch?v=FgtAMIOps_8
https://www.manualslib.com/manual/983364/Yamaha-Xc125.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/597176/Yamaha-Cygnus-X-Xc125.html

Yamaha... | Answered on Oct 05, 2019

Not finding what you are looking for?
2009 Yamaha V Star 1300 Tourer Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

D. E. Hev

Level 3 Expert

1187 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

vince

Level 3 Expert

1234 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ark AC Paddock Yamaha

  • Ark AC Paddock Yamaha

Most Popular Question

seat off 2009 yamaha star cable broken

  • Motorcycles
Loading...