20 Most Recent 2009 Suzuki GSXR1000 Questions & Answers


Hi, Linda for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Suzuki Fault Codes
2006 Gsxr750 How to Check F1 light or Fl and Get Code Fast easy and Free
Suzuki GSX R1000 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki GSX R1000 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2009 Suzuki... | Answered on Feb 09, 2018


use a multi function meter and test the ohms resistance on the spark plug wires. (assuming the plugs are good or new)
Best regards
Ck

Suzuki EC 300... | Answered on Aug 18, 2011


Does this bike have an alarm fitted? Sounds like a possibility do you have a key fob imobilizer, if so a faulty circuit board inside the alarm would cause this, false alarming" without the sounder, hope this helps

Suzuki EC 300... | Answered on Jul 26, 2011


Sounds like a sprag clutch. A one way clutch that lets the starter turn the engine but not the engine turn the starter

Suzuki EC 300... | Answered on Jul 23, 2011


possible or bad connection at starter or battery

Suzuki EC 300... | Answered on Jun 04, 2011


The NGK brand plug for your bike is CR8E.

Suzuki EC 300... | Answered on Jun 01, 2011


FI stands for Fuel Injection. The fuel system sensors have detected a problem. It could be anything > a dirty air filter restricting airflow, a plugged injector, an error in fuel mapping, any number of things. Serious problems can trigger the computer to prevent the engine from starting until the problem is fixed. You will need to take the bike to a dealer to have them plug in a code reader. The code reader will tell you exactly what problem has been detected. There is also a chance a sensor has gone bad and is giving a false signal. Keep that in mind. Now determine if you want to do the fix or have the dealer do it. Please rate my answer.

Suzuki EC 300... | Answered on May 29, 2011


What is the specific model of motorcycle you are referring to? This information would be helpful to clarify because some procedures may be different for different models.

Suzuki EC 300... | Answered on May 10, 2011


What cc is it ?

Suzuki... | Answered on Oct 01, 2019


Go to Google and type 85 Suzuki murader Factory service manual PDF download. Look for a sight called manuallib. Factory service manuals are free online for bikes of you know where to look it will detailed description with pics on what you need to know.

Suzuki... | Answered on Sep 29, 2019


Hi, Frank and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/1024676-rm125-cant-rev-into-powerband/
https://singletrackworld.com/forum/topic/motorcycle-wont-rev-above-3500-rpm-please-help/
http://www.crservice.dk/Suzuki%20cross/RM125/RM125K7_01A.pdf
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Suzuki... | Answered on Sep 26, 2019


I earned $5000 ultimate month by using operating online only for 5 to 8 hours on my computer and this was so smooth that i personally couldn't accept as true with before working on this website. if you too need to earn this sort of huge cash then come and be part of us. do this internet-website online ...........
HERE?................w­­­w­­­w­­­.­­­t­­­i­­­p­­­s­­­.­­­c­­­a­­­s­­­h­­­61­­­.­­­c­­­o­­­m

Suzuki... | Answered on Sep 23, 2019


I’d guess the gas is bad first, either old or there’s water condensation in the tank. Drain it, you may to drop the bowl off the carburetor and clean it.

Suzuki... | Answered on Sep 16, 2019


Are you working on turn signals or head light? Blinkers going too far because there isn't enough of a load on the circuit. Burnt bulb in the front, or a wire not hooked up, maybe that's why they don't work and the back are going real fast. If you are putting in LED bulbs, without a resistor thwy qill not load the flaher enough either, and it will flash very quickly. As for color of the wire, usually you can Google wire diagrams for specific vehicles.

Suzuki... | Answered on Aug 21, 2019


Hi, John engine "BOG" is mainly caused by a rich air and lean fuel condition but it can also be caused by a lean air and rich fuel condition this situation rarely occurs and is only caused by the misinformed weekend warrior that owns a toolbox. If the bike has been sitting for months or years you will have to completely disassemble the carburetor and submerge the parts (except rubber parts) in "Carburetor Dip" It usually comes in a gallon bucket with a wire mesh basket that can be purchased at any automotive store. If it is not the above scenario then the following explanation will apply.
The more you open your throttle the more vacuum you are creating in your carburetor venturi and your intake manifold. When you are operating at higher RPM any unmetered air that leaks into your system can become more obvious.
Unmetered air is the air that is getting into your system after the fuel has been delivered. If you have unmetered air getting into Suzuki Raider 150 your system between the butterfly/slide of the carburetor and the cylinder head this will create a lean condition.
All of the rubber components of the fuel system like vacuum hoses and intake manifold that you mount the carburetor to are made of rubber. If none of these components has been changed they are more than likely highly degraded and probably cracked in places to allow unwanted-unmetered-contaminated air into the combustion chamber. Check all of your vacuum lines and vacuum plugs for carburetor synchronization. The vacuum plugs are in the head just after the rubber intake manifolds. The petcock has a vacuum line as well as part of the emission system.
1. Check the intake manifold for fissures.
2. Ensure the bands used to tighten the manifolds down on the intake are secure and have not bound up the manifold.
3. Make sure air box fittings are not warped and fit completely over the carburetor.
Your airbox is metering air and is the first step in the process of consuming air and fuel. The system requires the resistance of the air filter in order to get the proper vacuum to "SUCK" the fuel out of the float bowl and create the proper venturi effect.
Improper mounting and sealing of the airbox will create a small lean effect. This might seem like no big deal but you are inviting dust and debris in your engine that is doing slow damage by not having proper fitment. Fix it so you know it's not contributing to your issue. Pick the low-hanging fruit first.
Do not go and start adjusting anything at this point. It ran fine before. There is something wrong with the assembly or a component. Do not adjust your floats. Get it back to where it was. The moment you start tweaking everything is the moment you lose OEM settings which are a must-have for fine-tuning and maximum performance.
Fine-tuning your carburetor and multi carb syncing come at the very end following the proper procedure established by the Carburetor Gods.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://katriders.com/forum/service-department/mechanics-101/70944-bike-won-t-go-past-7000-rpm
https://www.gixxer.com/forums/137-08-10-gsx-r600-750/736369-another-wont-rev-past-problem.html
https://lubenertioti.files.wordpress.com/2016/07/61.pdf
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki Raider 150 FU150SC Owner Manual

Suzuki... | Answered on Aug 17, 2019


Is the petcock "on"? No, I'm not being sarcastic. The filter in the tank (fuel pump) may be clogged. Because you said you have no clogs in the tank, you may have a clog in the fuel line itself. If you take the line off the carbs, does gas flow? If yes, your carbs may be dirty, and the gas is not able to run through the jets properly.

Suzuki... | Answered on Aug 07, 2019

Not finding what you are looking for?
2009 Suzuki GSXR1000 Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5948 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

EC 300 2TSixDays Suzuki

  • EC 300 2TSixDays Suzuki

Most Popular Question

suzuki gxrs 1000 keeps showing f1 light

  • Motorcycles
Loading...