20 Most Recent 2008 kawasaki Vulcan 1500 Classic - Page 2 Questions & Answers


If the oil is too thick there will be reduced lubrication. If too thin it will be noisy.

kawasaki... | Answered on Aug 22, 2019


you are going to have to drain it out and refill with the right oil

kawasaki... | Answered on Aug 21, 2019


hi first measure the compression to know if its okey before checking the pick up censer,

kawasaki... | Answered on Aug 19, 2019


Remove old bearing and take the numbers off it into a bearing shop

kawasaki... | Answered on Aug 15, 2019


A smoked clutch or broken tranny shaft. Most likely the clutch.

kawasaki... | Answered on Aug 12, 2019


Hi, Tim for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://itstillruns.com/decode-13-digit-vin-number-8487228.html
https://www.kawasakimotorcycle.org/forum/kawasaki-streetbikes-sportbikes/148635-zxr-750-12-13-digit-vin-frame-number.html
Kawasaki KZ1100 Service Manual
OEM Parts for Kawasaki
Kawasaki KZ1000R Owner Manual

kawasaki... | Answered on Jul 30, 2019


Hi, Jody for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=wiring+diagram+1985+kawasaki+ninja+600&tbm=isch&source=univ&sa=X&ved=2ahUKEwj1l9ik19PjAhUMnFkKHTesAX4QsAR6BAgHEAE&biw=1440&bih=757
Kawasaki Motorcycle Wiring Diagrams
Kawasaki 1985 ZX600 Service And Repair Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

kawasaki... | Answered on Jul 26, 2019


Hi, Chris the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.kawasakimotorcycle.org/forum/vintage-motorcyle-info/128338-1984-kawasaki-zn-700ltd-service-manual.html
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki
https://www.motorcyclespecs.co.za/model/kawasaki/kawasaki%20ZN%20700%20LTD%2084.htm
https://en.wikipedia.org/wiki/List_of_Kawasaki_motorcycles

kawasaki... | Answered on Jul 06, 2019


https://www.google.com gives a number of sites with manuals for sale.

Example below:

https://www.z1enterprises.com/motorcycles/kawasaki/kz250/maintenance-parts/manuals-books.html

kawasaki... | Answered on Jun 29, 2019


Was it running when it went under? If it was may need major work if engine swallowed water while running. Was it salt water or fresh. If it was not running when it went in you can drain all fluids and flush. Carbs or throttle bodies need to be removed and cleaned spark plugs pulled and checked for water. Once all cylinders are are free of water fog them and reasemble. Add new fluids and gas and try starting. If it is still drippin g water you will need for bike to completely dry. Hair dryer on low will help dry electronic controls. Do not over heat.

kawasaki... | Answered on Jun 27, 2019


Hi, Henry I would call Kawasaki 866-802-9381 because the VIN number indicates the bike was not made for the U.S. market for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.pwctoday.com/showthread.php?t=210810
https://faq.ninja250.org/wiki/Engine_number_and_year_of_manufacture
Kawasaki VIN Decoder get VIN Number Decode for any Kawasaki for free
http://www.thisoldtractor.com/mg_manuals/book_motorcycle_identification.pdf
https://en.wikipedia.org/wiki/Kawasaki_motorcycles

kawasaki... | Answered on Jun 10, 2019


This could be many things, wrong gaskets, wrong torque, warped heads, or improper installation.

kawasaki... | Answered on Jun 06, 2019


1. How do you know that there is water in a cylinder?
2. Check for spark. Harbor freight has a cheap spark checking tool.
3. Check for gas. Should be able to pull the fuel line off the injector pump and turn the key on. fuel should come out.

caution******dont do both at the same time
Most likely if it cranks (engine turns over) but doesn't start, one of the two above is not happening, although, it could also be an injector pump.

kawasaki... | Answered on Jun 04, 2019

Not finding what you are looking for?
2008 kawasaki Vulcan 1500 Classic Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5924 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

richard libby

Level 2 Expert

209 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Vulcan 1500 Classic kawasaki

  • Vulcan 1500 Classic kawasaki

Most Popular Question

2008 kawasaki 1500 all sudden start

  • Motorcycles
Loading...