20 Most Recent 2007 Aprilia SR 50 R Factory - Page 3 Questions & Answers

Check the alternator output it should be about 14.2 volts at about 1500 RPM

-If you can access to. Good luck Mai

Please, refer to the following link: http://www.apriliaforum.com/forums/showthread.php?203454-changing-brake-pads

It is pressed on the tapered shaft, you need a tool called a gear puller.

First of all, is there fuel in the tank? is it reaching the engine,have you a spark at the ignition plug?

Its not impossible, but it could be an thermo electric problem with bobine / ignition coil

Bummer deal! if the oil level is low - check and fill if so, the bike will not start. I assume the battery is good. Swith your fuel pet-**** to a different fuel on position. Bang the kick stand in its closed position. Hope this works for you. Other bike tips at http://www.auto-tune-up-and-repair-options.com/motorcycle-additives.html

strange cant find an online repair manual for that scooter could be the indicator switch itself a bad earth best start with checking the flasher relay and wire connections to it loose or broken wire with vibration when motor running maybe flasher itself is ok when cold not ok when hot or its overloading with the engine running

This does not appear to be a 2002 DYNA