20 Most Recent 2007 Keeway Matrix 150 Questions & Answers


Hi, Anonymous first thing is you forgot to measure the aftermarket for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
piston slap issue
http://www.antiquemotorcycle.org/bboard/showthread.php?19951-What-Causes-Piston-Slap-amp-or-galled-cylinders KEEWAY SUPERLIGHT 125 150 SCOOTER SERVICE REPAIR PDF MANUAL DOWNLOAD 2006... $12
Keewayparts com Genuine Keeway Parts Shipped Worldwide
KEEWAY HURRICANE User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Keeway Matrix... | Answered on Apr 02, 2017


Either the variator is stuck in the geared up position usually due to the rollers being worn or the belt is too short.is the throttle cable ok and not jammed with some free play in it ?

Keeway Matrix... | Answered on May 02, 2015


Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day
http://www.49ccscoot.com/manuals/Keeway_50cc_2T_Service_Manual.pdf
https://www.racingplanetusa.com/keeway-supermoto-c-802_54157-1.html
http://kampanje.gromstad-auto.no/full_download_keeway_x_ray_owners_manual_pdf_download.pdf
https://bikez.com/motorcycles/keeway_x-ray_e_2007.php
Keeway Wikipedia

Keeway... | Answered on May 17, 2019


Hi, Ron before testing any electrical component in the Turn Signal Light Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, "AGM" batteries fall into this category more so than lead-acid types, also before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced your OEM lights with one or all LED lights you are going to need a load equalizer.
If no turn signals are working the cause could be a faulty turn signal module/flasher or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion.
If your turn signal comes on but takes several seconds before it starts flashing you may have dirty contacts in the turn signal switch/button, the switch needs to be opened up and cleaned also the flasher may be starting to fail. It should be noted that cold weather will only exacerbate the situation especially when temperatures drop down below freezing and the location of the component, turn signal switches on the handlebar are at the mercy of the oncoming freezing 70 mph wind and makes it hard for the contacts to do their job covered in frozen grease/grime
If all four turn signals flash at the same time like hazard lights even though you only pressed one turn signal button then you have a LED light in the circuit and need a load equalizer that can be purchased from any motorcycle parts supplier.
If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function.
If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction.
If your rear turn signals don't work check your rear fender wiring harness connector first, look for, corroded, broken, loose pins/sockets, power, and a good ground, the harness connector is usually located under the seat on the front of the rear fender then keep tracing the wiring look for obvious harness damage caused by the rear tire.
If you still can't find the malfunction backtrack from the rear fender wiring harness connector.
If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.youtube.com/watch?v=Ob4JWFQ6aTc
https://www.google.com/search?biw=1440&bih=757&tbm=isch&sa=1&ei=wq-9XNjKJOK0gge40I7oDA&q=++wiring+diagram+keeway+dorado+250&oq=++wiring+diagram+keeway+dorado+250&gs_l=img.12...16160.41491..43782...0.0..0.76.275.4......0....1j2..gws-wiz-img.......0j0i8i30j0i30j0i7i30.JbQQrbsO2yE
http://proxy-mx2.domainwink.com/keeway_dorado_service_manual.pdf
Keewayparts com Genuine Keeway Parts Shipped Worldwide
https://bikez.com/motorcycles/keeway_dorado_250_2014.php

Keeway... | Answered on Apr 22, 2019


Since all electrical works the same regardless of the vehicle, I would suspect that you've got a couple of grounds making contact where they shouldn't (power flow through).

I would recommend getting a volt meter that can check for OHMS and trace each line to determine it's function and polarity since on vehicles most things work when you give them 'ground'. From there, label each one somehow (tape, dots with a permanent marker ect) so you can keep the grounding wires separate from the positive or 'charged' ones. I hope this helps and good luck!

Keeway... | Answered on Feb 16, 2019


find a real mechanic that can reason out the failure and fix the fault
indicates a problem in the adjustment or a cable problem or if hydraulic , air in the system

Keeway... | Answered on Feb 28, 2018


Hi, be carefull red lights are always a sighn of trouble !!!
in your case please check the wiring connection at the oil pressure gauge (usualy in the front of crankcase ) As for the tail bake light, also check wiring connections at the brake pedal switch and front brake switch ( under brake lever) Also check bulb. It will bea good idea to spresd som wd40 all over the electrical connections . Hope this helps

Keeway... | Answered on Nov 03, 2017


Hi, Ignis because I live in Florida the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Keeway Motor UK Learner Legal Motorcycles and Scooters
Used Motorcycles
https://pramellafo.files.wordpress.com/2015/07/keeway-superlight-125-service-manual.pdf
Keewayparts com Genuine Keeway Parts Shipped Worldwide
KEEWAY Speed 125 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Keeway... | Answered on Oct 20, 2017


Hi, Delaney for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your KeeWAY, despair not, for a mere zero $34 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to remove seat of keeway RKV 125
How to remove seat to access battery
KEEWAY CRUISER 250 MOTORBIKE WORKSHOP REPAIR MANUAL Download Manuals... $34
Keeway Cruiser 250 front mudguard
KEEWAY Cruiser 250 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Keeway... | Answered on Sep 21, 2017


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Keeway, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Keeway superlight 150 service manual
Keeway Parts Keeway Parts Suppliers and Manufacturers at Alibaba com
http://http2.internetarchitects.be/keeway_superlight_150_user_manual.pdf
Keeway Superlight 150 2015
Keeway Superlight

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Keeway... | Answered on Aug 29, 2017

Not finding what you are looking for?
2007 Keeway Matrix 150 Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Keeway Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

richard libby

Level 2 Expert

202 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5860 Answers

Are you a Keeway Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Matrix 150 Keeway

  • Matrix 150 Keeway

Most Popular Question

alot trouble

  • Motorcycles
Loading...