20 Most Recent 2010 Yamaha Stratoliner S Questions & Answers

When you get to the clock, push and hold the button. The hour will flash - bump the button to go up. To get to the minute, push and hold again to get to the minutes, bump to go up. This is the method for the few Yamahas I have messed with although I've never messed with this particular model - but it's worth a try..
Scott

For complete exploded views of your motorcycle this sit can help, along with parts pricing. http://www.bikebandit.com/houseofmotorcycles/2007-yamaha-xv19ctsw-stratoliner/o/m10474#sch532077

doesnt have one

Hold the select button for at least 2 seconds on the left side of your handlebars. The switch is on the backside of the controls.

Sounds like a defective lifter.
Should still be Under warranty. Take it back let them fix it.

Checking around I found this tidbit:

"turned out that I screwed up and overfilled the bike with oil, which apparently got aerated and managed to form an air bubble in one hydraulic lifter Tappety tap. Removing a half quart of oil or so made the problem go away."

Also read where there was a recall on these concerning the lifters.
Supports my theory it is possibly a defective part.

Since you only have 600 miles on the bike. This is the time to take it back to have the break in oil replaced. Have them check it.

Good luck!
Hope this helps.

This is a highly ill - eagle act to do. In the old days we would put an electric drill on the drive cable, but now they make them tamper proof so they only go one way. The bezels are crimped on so you can't get inside them. I expect modern one may be electronic. How will your insurance company know what mileage you have done? I have never known an insurance cancel or fine due to mileage. You should have just disconnected it when you got close to the limit. Buy a used one and use them for 6 months in turns. There are two or three here 23K and one with 36k https://www.google.com/search?q=2002+yamaha+sr125+speedometer ..

Not mentioned in the Service manual http://www.badrad600.com/Yamaha_Radian_Factory_Service_Manual_OCR.pdf https://www.google.com/search?q=1986+Yamaha+YX600+Radian+remove+USA+speed+restriction Something like this?

Removing 95bhp restriction ' Yamaha Star Cycle V-Max ...

vmaxforum.net https://www.vmaxforum.net > threads > removing-95bh... Jan 14, 2013 - Air jets could easily become blocked. Step 3: Removing the speed restriction. On the back of the speedo-needle a disc with two different . ..

Check the diagrams here https://www.google.com/search?q=yamaha+sega+81+firing+order ..

Question edited for a lot more clarity, add maker. Question moved to Yamaha Motorcycle. Unlikely to be a carburetor problem as this appears to be fuel injected! https://www.google.com/search?q=Yamaha+Mio+125+MX+no+start ..

Make sure the fuel is getting to the valve and passing through it. Possible blockage in fuel line or in the tank.

It isn't called a Magneto, that was for really old bikes. It is a 'stator'. Service manual https://drive.google.com/drive/folders/1OFbBW2YhLpL1-Xbsw9vexi84Y7aXGTdG Parts List https://www.cmsnl.com/yamaha-rt100-1990-l-usa_model9624/partslist/ https://www.google.com/search?q=1990+yamaha+rt100+wiring+diagram ..

First make sure that the new battery has been fully charged and is not defective. Next make sure that the proper voltage is reaching the started. You may have a bad post connection or loose connection at the starter. Try jumping you battery with another known good battery.

Above the master cylinder on each brake.

Your Service Manual is here

service-manual-yzf-r15.pdf

Ridertua https://ridertua.files.wordpress.com > 2011/04 > se... To help identify parts and clarify procedure steps, there are exploded diagrams "3" at the start of each removal and disassembly section. • Numbers "4" are ... 338 pages ..

What Exactly does the bike do when it 'loses power'? This will give clues as to where the issue could be. When was the last time the bike was given a major service? Sometimes it can be as simple as a dirty fuel/air filter or an old/worn or dirty spark plug.

Are you wanting the size of the hex bolt head or the thread size and bolt length? Most oil pan plug bolts are either 17mm (5/8th socket) or 19mm (3/4" socket) bolt heads.

1. Fuel System Issues:
   • Check the fuel system for clogs, such as a dirty fuel filter or carburetor jets.
   • Ensure that the fuel tank and fuel lines are clean and free from debris.
   • Consider adding a fuel system cleaner to help clean out any deposits.
2. Ignition System Problems:
   • Inspect the spark plugs for fouling, wear, or improper gap.
   • Check the ignition timing to make sure it's set correctly.
   • Inspect the ignition coils and wiring for any loose connections or damage.
3. Air Intake and Exhaust Issues:
   • Examine the air filter for clogs or dirt that may restrict airflow.
   • Inspect the exhaust system for any leaks or blockages.
4. Vacuum Leaks:
   • Check for vacuum leaks in hoses, gaskets, or intake boots. A vacuum leak can cause an improper air-fuel mixture, leading to backfiring.

Chain broken. Tetth stripped on final drive. Etc etc. Take a look.