Kymco Motorcycles - Page 5 - Popular Questions, Answers, Tips & Manuals
My kymco zing 2 has started leaking fuel from somewhere under the tank is this a common problem?
anything that has a plastic fuel tank in it is a common problem 4 leaks !! I've had brand new chainsaws , tractors, and yep even bikes come in here with fuel drips !! its them plastic fuel tanks everytime !! they jjust cant take the chassis flex the ole metal ones could (but then again ive never seen plastic rustout either ) and they get small cracks in them right where they attach to frame most times too !!
7/29/2016 10:20:46 PM •
Kymco...
•
52 views • 0 helpful votes
It cranks, but why won't it start?
HI Luann:
I'd pull the spark plug(s) and clean and dry them, then check for spark.
It's possible they got wet with fuel when the start with kill switch on was tried.
Does anybody know where I can get a head cylinder for a 2007 kymco venox 250cc
Try eBay or a motorcycle part finder site
And on the problem of it reoccurring difficult to say as need to know what damage was caused to piston and valves
Was it just one rocker arm that broke or is the other damaged did the timing jump and piston hit open valves driving them up and breaking arm and damaging cam shaft lobes
You really need to find out why and how it happened
As it may require a complete timing system replacement on that cylinder cam shafts , rocker arms , valves ,drive sprockets top and bottom , drive chain and a piston
How can I tell if "I" have a blown head gasket?
Find exactly where the fluid is leaking. It could be simply a fractured line. Is your oil okay? If not diluted with coolant then unlikely to be the head gasket. Not down on performance? Again unlikely it is the gasket.
2006 Venox 250. Why won't it start?
Hi,try undoing the battery and leave for 30mins and reconnecting the battery and see if it rights itself,worth a try.
7/16/2015 10:54:24 PM •
Kymco...
•
172 views • 0 helpful votes
Horn is not working sometimes it works
This is almost always a bad earth or corroded switch. First clean the two terminals on top of the horn. If that doesn't work, take the switchgear with the horn button off your bike and clean inside where the button touches the metal contact. If it's very corroded you might need to source a good second hand unit.
7/19/2015 2:18:17 AM •
2012 Kymco...
•
162 views • 0 helpful votes
Not finding what you are looking for?