kawasaki Motorcycles - Popular Questions, Answers, Tips & Manuals


I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all t he times I fixed the chipper in these 4 years

kawasaki... | 264 views | 1 helpful votes


Hi, Vinny for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.vulcanforums.com/forums/54-vulcan-1700/168890-clutch-problem.html
How to bleed hydraulic clutch on motorcycle VULCAN 1500 as example
Kawasaki VULCAN 1700 VOYAGER Service Manual
OEM Parts for Kawasaki
Kawasaki Vulcan 1700 Voyager Owner Manual

2014 kawasaki... | 37 views | 0 helpful votes


Hi, Lew and the usual suspects are:
1. Severely discharged or a damaged battery must have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Faulty alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. A faulty main circuit breaker or ignition switch, check for loose connections and continuity.
5. Faulty system relay or ignition relay, check for continuity.
6. Faulty ignition coil, ignition/electronic module.
7. Faulty CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Fuel tank empty
11. Fuel tank contaminated with ethanol sludge.
12. Water or dirt in the fuel system, or clogged filter.
13. Quick disconnect check ball stuck.
14. Restricted, blocked or kinked fuel line.
15. Faulty fuel pump.
16. Faulty pressure regulator.
17. Faulty or clogged fuel injectors.
18. Lean angle switch is faulty or needs adjustment.
19. Catastrophic engine failure, perform a compression test.
For more information about your issue and valuable "FREE" downloads that you need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
No electrical power on bike KawiForums Kawasaki Motorcycle Forums
https://www.zxforums.com/forums/zx-12r-forum/64304-no-electrical-power.html
KAWASAKI NINJA ZX 10R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual

2005 kawasaki... | 31 views | 0 helpful votes


Hi, Liam for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.zx6r.com/zx6r/102090-auto-choke-does-not-work-difficult-cold-start.html
Choke not working ninjette org
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual

2007 kawasaki... | 41 views | 0 helpful votes


Hi, Mark should be a 6 speed for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki ZL750 Eliminator
KAWASAKI Eliminator Generations Timeline Specs and Pictures
1986 Kawasaki ZL500 ZL600 Service Repair Workshop Manual DOWNLOAD Download... $15
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

kawasaki Z 750... | 2,226 views | 1 helpful votes


Hi, Alex if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your headlight bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to the headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.sportbikes.net/forums/zzr-600/387131-need-help-fast-headlights-not-working.html
Headlight doesn work KawiForums Kawasaki Motorcycle Forums
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual

kawasaki... | 26 views | 0 helpful votes


Hi, Darryn my guess is probably, parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another "EXCEPT" for the CDI's they are year-make-model "SPECIFIC" the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalog or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to test motorcycle CDI box ignition coil
how to test and repair motorcycle CDI electronic ignition module coil...
MX Tech Tips How to check your Stator Coil
Kawasaki KX125 Service Manual also 250
1991 Kawasaki KX250 Owner Manual


kawasaki KLX 250... | 27 views | 0 helpful votes


Hi, Orry you can download everything you need from here for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to test Ignition Coils on Motorcycles multi meter
Testing your motorcycle coil
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

1992 kawasaki... | 1,822 views | 1 helpful votes


Hi, Dennis the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.sportbikes.net/forums/zzr-mods/407793-neutral-safety-switch-repair-instructions-pics.html
Replacing the Neutral Safety Switch on Motorcycle Kawasaki ZZR600
https://www.tradebit.com/filedetail.php/278481802-kawasaki-zzr600-service-repair-manual $15
OEM Parts for Kawasaki
2006 Kawasaki ZZR600 Owner Manual

2006 kawasaki... | 23 views | 0 helpful votes


Hi, Phillip for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to Adjust Float Height in Your Carburetor
Carburetor Float Height Adjust Check
KAWASAKI ER 5 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

1998 kawasaki... | 51 views | 0 helpful votes


Sounds like a neutral switch relay problem....check your relays and fuses..........

kawasaki... | 34 views | 0 helpful votes


Hi, Darcy for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Fuse+box+location+2001+Kawasaki+ZX-9+R+Ninja&tbm=isch&source=univ&sa=X&ved=2ahUKEwizpMv93dThAhXOuFkKHcYJB38QsAR6BAgHEAE&biw=1440&bih=757
https://www.zxforums.com/forums/zx-9r-forum/50563-fuse-panel-location.html
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
2001 Kawasaki Ninja ZX 9R Owner Manual

2001 kawasaki... | 21 views | 0 helpful votes


Hi, Paulo I would start with a proper tune up, for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.amazon.com/Kawasaki-Tune-VN800-95-06-Vulcan/dp/B00NFRZXMA
Kawasaki Vulcan 800 Spark Plug Replacement Tank Removal
Kawasaki vn 800 classic Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

2002 kawasaki VN... | 19 views | 2 helpful votes


Hi, Maartin for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Wiring diagram 1981 kawasaki KZ 1300 A5 Google Search
Kawasaki Motorcycle Wiring Diagrams
1300 FSMl 1997 pdf
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

1983 kawasaki KZ... | 29 views | 0 helpful votes


Hi, George for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere $20 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+1997+kawasaki+ZRX+1100&tbm=isch&source=univ&sa=X&ved=2ahUKEwiSkfTE3OfhAhUq1lkKHcD2A7IQsAR6BAgJEAE&biw=1440&bih=757
Kawasaki Motorcycle Wiring Diagrams
https://www.tradebit.com/filedetail.php/281259102-kawasaki-zrx1100-zr1100-zrx-1100-complete-workshop $20
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

1997 kawasaki... | 18 views | 0 helpful votes


Hi, Dean for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.dynaonline.com/support/downloads.aspx
http://www.dynatekuk.com/downloads.html
https://www.manualslib.com/manual/375185/Kawasaki-Vn1600-Mean-Streak.html#product-VN1600
OEM Parts for Kawasaki
2004 Kawasaki Vulcan 1600 Classic Owner Manual

2004 kawasaki VN... | 20 views | 0 helpful votes

Not finding what you are looking for?
kawasaki Logo

14,464 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5823 Answers

Marvin
Marvin

Level 3 Expert

84543 Answers

richard libby

Level 2 Expert

202 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...