Honda VT 750 DC Shadow Spirit - Popular Questions, Answers, Tips & Manuals
What are the torque specs for a 2002 Honda Shadow 750 head bolts
The torque specs for a 2002 Honda Shadow 750 head bolts are:
- Tighten all bolts in a criss-cross pattern starting from the center to 22 ft-lbs.
- Tighten all bolts in the same pattern to 43 ft-lbs.
- Tighten all bolts in the same pattern to 47 ft-lbs.
- Tighten all bolts in the same pattern to 51 ft-lbs.
It's recommended to use a torque wrench to ensure accurate tightening.
How to replace the light bulb on speedometer.
You will want to remove the entire speedo and gauge assembly. This can be done by disconnecting the wires under the headlight housing, and unbolting the cluster for removal. After this you can take off the plastic shroud of the gauge cluster and you should be able to locate the locations where the light bulbs plug in from there.
Oil light keeps coming on and oil level is ok
Oil level might be OK but is it being pumped around the engine at the right pressure. I would try draining the oil and removing the old filter.
Then refit a new filter and re-fill with new oil. If the light goes out after this, problem solved, if not you need to check oil pressure switch is OK and/or the oil pump is working. Good luck.
How to set the timing of 2002 shadow?
the spark timing is electronic and there is no adjustment possible. the engine timings ok or it would not be running as it is . it might be running lean or rich ,has the exhaust been changed or modified ?,that could cause a miss
Honda vt750s problems
If normal and long one are not working, then fuse or switch, if long is o.k., and normal not, then the bulb
Not finding what you are looking for?