Hero Motorcycles - Page 2 - Recent Questions, Troubleshooting & Support

You could advance the ignition but you may have issues starting the bike if the water tank is empty as the compression will not be there.

change throttle wire/ accelerator cable

before putting 3k first replace the clutch cable. due to aging and deterioration clutch cable become rigid also friction increases. so, the contact of clutch plate is not good. and engine makes sound and you fill 1 gear engine sound up to 4th gear.

no. it is a gear box design

hello, I did some looking for you and found this article which describes exactly what to do, also a useful link, hope this helped you have a great day Typically, Honda seats have a bolt at the rear and one on either side. Remove the bolts, the seat comes off easily. This process is described in your owner manual which should be in its space behind one of the side covers. In that same space, you should find a tool kit with the tools required to remove the seat. You might want to check out this site ... http://hrca.honda.com/publications/. Some Honda batteries come out the side. Some other Honda motorcycles have a seat which unlocks and opens up in a similar fashion to a glove box in a car. The battery is easily accessible in this style. I don't think yours is this style, still this is good information to have.

remove carb, drain fuel leave for a few hours, and heat the screw, use pliers to gently remove.

usually speedometer problems are due to the broken speedometer wire you can replace them by buying one from hero service/spare parts store and get them fixed from any mechanic If you want to do them all by yourself then lemme warn u that it is not that easy . You will have to remove the wire connection from the head by removing the Visor then unscrewing it from the back of dial connection then you will need to pull out the wire from the drum's end (only the wire not the whole setup) then replace it with new wire u bought, Doing all the steps backwards if u know what i mean and VOILA!