Cars & Trucks - Recent Questions, Troubleshooting & Support
Oil Pressure Low- Shut Off Engine message
If your Oil Pressure Sending Unit went bad, it will do thisIf you have a Blockage in the Oil system, it can do itIf you are low on oil, it will do thisIf you have done Damage to the Engine, it can do thisIf you increase your oil to 20W-50 and the light goes off, you have a worn journal or Bearing Wear
2013 Chevrolet Impala 3.6. Location of oil pump?
Hi Daniel Murray, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?
I use Mitchells. or go to gm we site and
pretend to buy the pump and see where it is.
or google it.
FSM page , engine mech
A crankshaft driven gerotor oil pump with internal pressure-relief valve is mounted to the front of the engine block
thar she be....
Toyota Corolla 1.3 Esteem 2014 model, I am having problems with the selection of 4th gear at certain times only,
no country told. Esteem is not really the true makers name.Called SUZUKI but.
no 1.3L here.USA
you said 4th fails but what about 5 and 6 gears?
this Esteem is a Toyota Corolla badge'd as Suzuki. << so manuals on toyota show this.
I think Corolla are listed as the most cars by brand ever made. so documents are easy. find and I did.
called the EC65 transmission.
well checking linkage problems is first and levels next.
it is twin cable complex shfit cable set. both end must be good, and adjusted.
the manual shows the calibration to the ends (the are threaded swivels), these steps are tricky and
not reading the manual will not ever be done correctly
if you run it low on GL4,? the box will be damaged.
why not have shop check it out. and do lube change.
missing parts are not good ever. these were not optional. there.
now inside the box what could be wrong. well
the shift forks are failing for 4th
the lever lever tip bad
forks bad inside box and or shift fork real detent balls missing, bad service cased.
or bad 4th gear lock up dogs or synro ring.
the car has service manual to read. that covers this transmission,
I found it. filler , level check in the FSM
"TOYOTA Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"
GL4 is what it is, the most common man. tranny lube on earth, used for DECADES now.
the manual is here
https://eautorepair.net/Checkout/ActivationPlan/2014/Toyota/Corolla
Turns on but no start problem on nissan
no car told, maker, model , year and engine optionno countryl told . wow,not told does the starter crank the engine over fast.that is first, or it will never start or run.cranking is first.check all fuses.?vast Nissan cars and trucks are sold all over earth and are not the same. if it does crank the crank shaft pulley fast then if gas enginecheck for spark. next.fuel tests are last.my car can be started 3 waysKey cranked.push started (in 2nd gear manual transmission)or gravity started off a hill.so as you can see there are 3 ways to start some cars.my guess is it cranks fast.fuses gooddash Gauge not on "E"nobody put diesel in the GASOLINE tank or water there from ECO pranks.spark fails doing the 100 year old now, classic test, using test spark plug>fueling dead but instant start spray works for 3 seconds.watch scotty Khttps://www.youtube.com/watch?v=064Ilsz8Fzghttps://www.youtube.com/watch?v=064Ilsz8Fzg
2002 ford expedition interior lights are not on what fuse is it?
Courtesy Lamps - central junction box. fuse # F1.21 that goes to interior lamp relay in the instrument cluster and F.24 this fuse powers battery saver relay .
Interior Lighting
The interior light system consists of the following:
- front map lamp assembly
- front door courtesy lamp
- generic electronic module (GEM)
- glove box lamp assembly
- central security module
- interior lamp switch
- interior lamp relay
- illuminated vanity mirrors (Navigator only)
- reading lamp assembly
- rear courtesy lamp
- running board lamp
- underhood lamp assembly
The generic electronic module (GEM) illuminates the interior lamps when an unlock signal is received from the remote anti-theft personality central security module. The illuminated entry feature will be canceled when any of the following conditions are met:
- 25 seconds have elapsed since the illuminated entry feature was activated and the interior lamp control is not activated (door ajar or courtesy lamp switch on).
- The GEM receives a request from the central security module (remote transmitter lock button pressed) and the interior lamp control is not activated.
- The ignition is in the RUN or START position and the interior lamp control is not activated.
The GEM will illuminate the interior lamps when any door is open or ajar. The interior lamps are; the dome lamp, the rear cargo lamp, the door courtesy lamp and the side rail lamps. The courtesy lamps will shut off when the doors are closed and the illuminated entry feature is not active or when the vehicle speed is greater than 5 mph (8 km/h). The interior lamps will not be reactivated until the vehicle speed is less than 3 mph (5 km/h) and a new door open warning lamp switch is received.
The GEM controls the interior lamps illuminated entry function by activating the interior lamp relay.
You have an electronic control module and relays involved in the operation of these lights also !
What
4/25/2024 12:14:53 AM •
2002 Ford...
•
Answered
20 hours ago
1995 Honda TRX 300 No Spark while cranking starts when start button is released, also starts off the kick start
When you have a situation where a vehicle like your Honda TRX 300 starts only when you release the start button or when using the kick-start, it's often indicative of an issue with the ignition switch or wiring. Here's a step-by-step troubleshooting guide you can follow:
- Check the Ignition Switch: Sometimes, the ignition switch can malfunction, causing intermittent starting issues. Make sure it's functioning properly by checking for any loose connections or signs of damage.
- Inspect the Wiring Harness: Over time, the wiring harness can degrade, leading to electrical issues. Look for any frayed wires, loose connections, or damaged insulation. Pay close attention to the wiring around the ignition system.
- Test the Ignition Coil: The ignition coil generates the spark that ignites the fuel in the engine. Use a multimeter to test the resistance of the ignition coil. Refer to your vehicle's service manual for the specific resistance values. If the ignition coil is faulty, it may not provide a spark consistently.
- Check the Spark Plug: A faulty spark plug can also cause intermittent starting issues. Remove the spark plug and inspect it for any signs of fouling, such as carbon buildup or damage to the electrodes. Replace the spark plug if necessary.
- Inspect the Kill Switch: The kill switch is designed to shut off the engine by grounding the ignition system. If the kill switch is malfunctioning or stuck in the off position, it can prevent the engine from starting or cause intermittent starting issues.
- Test the Starter Relay: The starter relay sends power to the starter motor when you press the start button. Use a multimeter to test the continuity of the starter relay. If it's faulty, replace it with a new one.
- Check the Battery: A weak or faulty battery can cause starting issues. Test the battery voltage with a multimeter. It should read around 12 volts or higher. If the battery voltage is low, recharge or replace the battery.
- Inspect the Starter Motor: If the starter motor is not engaging properly or is worn out, it can cause starting issues. Check the starter motor for any signs of damage or wear. You may need to remove it for a closer inspection.
By systematically checking these components, you should be able to diagnose and fix the starting issue with your Honda TRX 300. If you're uncomfortable performing these checks yourself, it's always a good idea to consult a professional mechanic for assistance.
Where does the power come from to the dash fuse box
These other people have no clue ! Battery voltage to the L/H & R/H inside fuse box's come from different sources. The ignition switch - when in the ACC,on an start positions , plus Mega fuses in the under hood fuse box. L/H BEC BATT 1 fuse # 5 40 amp location - under hood fuse box , plus R/H BEC BATT fuse # 2 30 amp fuse -location under-hood fuse box. Which inside fuse box? has two - left and right .
Not finding what you are looking for?
