Here is a serpentine belt diagram for a Ford E350 Diesel Van: http://serpentinebeltreplacement.com/1994-ford-econoline-e350-v8-7-3l-diesel-serpentine-belt-diagram/
SOURCE: serpentine belt replacement
2.0L Engines
See Figures 11, 12 and 13
The
accessory drive belt for 2.0L engines has no provision for manual belt
adjustment, since these engines use an automatic belt tensioner. Drive
belt slack is taken up by the automatic tensioner.
Movement of
the automatic tensioner assembly during engine operation is not a sign
of a malfunctioning tensioner. This movement is the tensioner
self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C
Fig. 12: Drive belt routing-2.0L SOHC engine without A/C
Fig. 13: Drive belt routing-2.0L DOHC engine
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
SOURCE: diagram for replacing serpentine belt on 2007
The routing diagram for your serpentine belt should be on the inside of your hood.
SOURCE: I need a diagram for replacing the serpentine belt
if you buy your belt at autozone the routing is on the package
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C
Fig. 12: Drive belt routing-2.0L SOHC engine without A/C
Fig. 13: Drive belt routing-2.0L DOHC engine
1,811 views
Usually answered in minutes!
×