I have a 1994 plymouth voyage se and it will not strat. It tell me to check gauge light comes on. what should i do or what does that mean?

You need to pull the instrument cluster out far enough to get to the plug that connects the wiring to said cluster. It apparently isn't plugged all the way in and clipped.

you need to have codes read with obd scanner this then will tell you the fault or faults.

Plymouth Voyager Repair Manual / Service Manual Online ...

? 0:43
https://www.youtube.com/watch?v=2GqbKAZhMcY
Dec 14, 2014 - Uploaded by Tanner Jackson
If you need a Plymouth Voyager repair manual, you're in luck. ...steering, suspension, engine, transmission, air conditioning, heater, or something ... 1994, 1995, 1996, 1997, 1998, 1999, 2000 (90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00) .... Plymouth VoyagerDodge Caravan 1996 19971998 1999 2000 3.3L ...
images for wiring diagram plymouth voyager

The warning light is telling the engine oil pressure is below 10psi.
The problem could be a faulty pressure switch, or the engine could really have low oil pressure.
You can replace the switch, or check the pressure with a mechanical gauge and see what happens.

sending unit in tank or gauge on dash may be faulty
check engine light should come on if engine dies

Take to local auto parts store and they will usually run codes for free and from there you can find the most likely source of the problem area.

You have some wiring problems shorting out that is coming from the dash board so if you or anyone you know how to use a multimeter to check the wireing harnesses plus check any connectors that might be just very touching the connector of dashboard which means a bad connection to dashboard.

Get those check engine light codes read. They should give a big clue that could save lots of time. Otherwise we are just sitting here guessing. The list is very long for things that can cause those symptoms.

The "check engine" light on the older models don't tell you things like "change oil, or check oil, or many other tings talking cars do today.

It could mean anything from one cylinder isn't firing well, (and that itself could be a plug, or broken wire), or it could mean that your low on coolant, or any number of things.

The best thing to do is take your vehicle to the dealer and ask the to run a computer code check..SOME garages charge a nominal fee, and some don't charge at all.

Depending on hw much you value your vehicle will depend on what you do. Checking the warning light now could save you big bucks later, or if you aren't concerned if the vehicle quits on you unexpectedly just ignore it. That's the choices, as limited as they are.

I hope this helps you some.

Thanks for letting FixYa.com...fix ya

If I've helped you, please rate my answer.


Terry

year make model and production date. Go auto zone ore one those kinds places they should be able to get the correct one Look the belt see if there number on the inside.
Here Best thing buy all 3 belts at auto zone take back the ones that arent the correct size.
In the mean time buy some belt spray to qwiet the thing down so your not embarrsed.
Buy Hanes book on the van also.
Hope this helps you if does please give me thumbs up seya