I have a cls 350 2006, i pair my phone with the blue tooth but it says not connected. the car have also its own nokia phone. i tryed almost all type of phones, I go to system choose blue tooth its find my phone i pair them with 0000 and a minute later it says not connected. or sometimes connected with a few second but fail again. what should i do? thanks

enable blue tooth on phone and wait while it searches...the infotainment center will show you a code on the screen...type in the code the car gives you into your phone..wait for the code... then pairing will be successful..

When you try to pair your phone to the car via Bluetooth are you allowing the car to see it by enabling the phone visibility setting.
To do this go into the phones setting find the blue tooth setting then select visibility this allows the car to see it for about 1 minute 59 seconds then go to the cars settings on the dash cluster to pair the phone it should now find it.

the owners manual should tell you how to do this, if not I would go back to dealer, and have them show you how to do this , with this being a 2014 iam sure they will help you

Please specify your phone make or model

Your phone has to be capable of blue tooth.Go into menu on car and phone for blue tooth.Set the car to discover or your phone and the phone will say discoverable for 30 seconds then the car or phone will say pair enter number. This number usually is 0000 then the car will say LG or what ever type of phone you have and you are done every time you get into the car it will automatically sink with your phone as long as blue tooth is turned on in your phone. Any one hooking their phone to your car will be number 2 If they drive the car and you are not with them their phone will hook up. You can by house phones that do this. You come home lay your phone down and your in another room the cell phone rings. You can push the cell phone button on your house phone and answer it or make a call from it . It will ask you on the screen if you want to use the home phone or cell phone and it stores your contacts also. If this helps please rate it

I have a 2009 Buick Enclave...a few months ago out of the blue, my blue tooth does not work...the phone rings in, but when I press talk on steering wheel...it goes quiet...it's connected but they can't hear me and I can't hear them....the phone worked fine, then one day it just started acting goofy...any suggestions? I have deleted, paired, unpaired!

Set your phone and the blue tooth on discover mode. Then hit find, and they should pair up

When u want to pair your bluetooth phone the first time, you must do this in the first 30 seconds after ingnition. This is the only period your audi bluetooth carkit is in search mode. Follow these steps to make it work:

Put your bluetooth phone in search mode, then start your car. Your phone will now detect something like AUDI UHV-1 or similar. Connect to this device, and enter either code 1234 or else code 0000. Your phone will then connect. Command your phone to keep the Audi device listed as a save connection, which can automatically connect. The next time you enter your car it will connect by itself (after ignition that is).

To activate the Jaguar's Blue Tooth and connect your cell phone simply turn on blue tooth on phone then press

##1#*# on the dash buttons

then follow instructions on your phone

then it will ask for the password

the link up and the password is 1313

If you need further help, I’m available over the phone at https://www.6ya.com/expert/yordan_0946180d068c57d5

have you made sure with nokia site that this blue tooth is compatible with your phone??

is you phone not even detecting the device?