Question about 2002 Jeep Liberty

1 Answer

02 liberty rear wiper dose not work plugin has power changed wiper motor still doses work

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 17,970 Answers

There is a nut under the black plastic bezel that needs to be removed. Here is the complete procedure for you to look at. Its possible that your arm isn't adjust at wiper motor...

REMOVAL
- Disconnect and isolate the battery negative cable.
- Remove the rear wiper arm from the rear wiper motor output shaft. (Refer to 8 - ELECTRICAL / REAR WIPERS / WASHERS/REAR WIPER ARM - REMOVAL).
- Using a small thin-bladed tool, gently pry at the notch in the base of the rear wiper motor output shaft bezel to unsnap the nut cover from the bezel (REAR WIPER MOTOR OUTPUT SHAFT NUT REMOVE/INSTALL). Be certain to take proper precautions to protect the outer tailgate panel and its paint finish from damage during this procedure.
- Remove the nut that secures the rear wiper motor output shaft to the outer swing gate panel (REAR WIPER MOTOR OUTPUT SHAFT NUT REMOVE/INSTALL).
- Remove the bezel and gasket from the rear wiper motor output shaft.
- Remove the trim panel from the tailgate inner panel. (Refer to 23 - BODY/SWING GATE/TRIM PANEL - REMOVAL).
- Disconnect the tailgate wire harness connector for the flip-up glass ajar switch from the flip-up glass latch connector receptacle.
- Disconnect the tailgate wire harness connector for the rear wiper motor from the motor connector receptacle (REAR WIPER MOTOR REMOVE/INSTALL).
- Loosen the two screws that secure the rear wiper motor mounting bracket to the top of the tailgate inner panel.
- Slide the rear wiper motor and mounting bracket forward far enough to disengage the two mounting screws from the keyed slots in the top of the tailgate inner panel.
- Remove the rear wiper motor and mounting bracket from the tailgate as a unit.

02 liberty rear wiper dose not work plugin has - zjlimited_494.gif

1 - BEZEL AND GASKET
2 - OUTPUT SHAFT
3 - TAILGATE OUTER PANEL
4 - NUT
5 - NUT COVER

What you will need to do is to remove the small plastic cap on the wiper arm by prying it off with a screw driver. Then remove the nut that holds the arm onto the shaft. Then get yourself a battery cable puller (from auto parts store) and pull the arm off of the shaft..

zjlimited_495.gif

1 - SPARE TIRE
2 - WRENCH
3 - FLIP-UP GLASS
4 - PARK RAMP
5 - REAR WIPER ARM
6 - PIVOT COVER

Posted on Jul 19, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Code search on 02 grand marquis came 024,025,052 for my heater dose not work. What dose the codes mean?


Codes 24/25 are blend door motor codes indicating one or more blend doors are inoperative. Code 52 indicates there is a short circuit in the A/C solar radiation circuit

Feb 20, 2016 | Cars & Trucks

2 Answers

Rear windshield wiper sprayer doesn't work but the fronts work fine 2002 jeep liberty limited


The rear wiper has its own pump motor. pull the hose from the wiper and have someone engage to see if there is a clog. do the same at the motor. if bo liquid comes out then its the pump. also check fluid level in reservoir as well as a possible secondary reservoir

Dec 01, 2012 | 2002 Jeep Liberty

1 Answer

02 Toyota Sienna power sliding door not working


See if power reaches the motor. If it does and motor does not operate you have found the problem. If no power then the issue is electrical in nature and you will have to trace the current flow to the motor.

Apr 11, 2017 | Cars & Trucks

2 Answers

Got power to motor,but wiperblades wont move.


check and make sure it has ground if it dose your motor is shot but alot of times those motors are mounted on rubber so they have a hard time getting a good solid ground

Dec 18, 2010 | Honda Accord Cars & Trucks

1 Answer

Rear wiper not working when try to turn it on nothing happens on my jeep liberty


first check fuses if all good remove back hatch panel find wiper motor remove plug . turn the ignition key to on position turn on rear wiper now test wiper plug for power if no power replace wiper motor

Jan 04, 2010 | 2004 Jeep Liberty

4 Answers

2003 Jeep Liberty rear wiper does not work


If there is a separate switch for the rear wiper there might be a separate fuse. Check to see if your rear window cleaner works. If it doesn't check your fuse. If it does work i suggest that you replace the switch or check the connections of the switch. I hope this helps.

Dec 02, 2008 | 2003 Jeep Liberty

Not finding what you are looking for?
2002 Jeep Liberty Logo

925 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...