How to find temperature gauge sending unit on 1992 Chevy Beretta 3.1 L?

SOURCE: 1992 Chevy Beretta rear brake system

most likelly your wheel cilinders are leaking you need to pull the drums and you will see it right away, but if not go to autozone.com and you can buy the repair information for that specific car, just look for alldata.

Marvin

• 85242 Answers
• Posted on Nov 07, 2008

SOURCE: fuel sending unit in a 2000 chevy s-10 pickup

You must replace the sending unit in the gas tank to correct this problem, or do you already know this?

SOURCE: fan issue

check you thermostat and replace it , usually they go out after 10-15 years

SOURCE: temperature gauge not working 93 chevy 3500 5.7

What engine? 350? It is in the drivers side head. Between the 1 and 3 spark plugs.

SOURCE: Location of 1993 Chevy Lumina temperature gauge

If you follow the top radiator hose from the radiator to the enigine you will see a wire connecting to a screw in like plug. This screw in a the temperature sending unit. Disconnect the wire that is going to it and you should be able to unscrew the plug with a socket and ratchet. Be careful to do this when the engine is cold or you run a high risk of coolant spewing out and burning you. You sill lose some coolant even when it is cold but you shouldnt lose enough to have a problem with the coolant level. After you change it run the car and check the resevoir to make sure you didnot lose to much.