At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 1995 gt subaru legacy i need to put a new starter motor in .is it easy to take it out and put back in?if it is easy how do i go about taking it out
Re: I have a 1995 gt subaru legacy i need to put a new...
Most starters are held in place by 3 bolts ant one or two wires u have to take the ground cable off before anything usually in thetransmiton right next to the engine
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi you need to remove the top mount intercooler then the starter motor will be easier to get to, its held on by two nuts and the wires that are connected to it. its located on the passenger side of the motor at the back and can be tricky sometimes
I think I would pull the timing covers back off and see if one of the pulleys etc. is loose. Did you put the proper tension on the timing belt? It is also easy to put that belt on one tooth off, the motor will still run and can produce the knocking noise, take care and good luck. ps I assume the oil level is good in the motor.
You just did. Its the master switch. Buy a switch from a large parts store, use a flat tip screwdriver to remove switch then install new switch. This should take you about 20 mins. Super Easy
If your havinf any trouble I suggest you can pick up a repair manual from any part store and if you feel like spending around $26 you can get alldata online for you car for a year I just did it for some wiring diagrams and it helped me out bigtime good luck
easy 2 do yourself follow your poitive termimal this will take you 2 the starter motor, unbolt wires off the back of starter then unbolt from bellhouseing starter should come out.
×