At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Is there a brake safety fuse that shuts off the...
The ABS would not shut off the engine, I suspect something with the engine is causing the shut down (fuel pump, or other things) and the ABS light gets triggered during that event.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It isn't often we get enough information to make a diagnosis, but I think we can in this case.
You have a break light switch under the dashboard that is plastic, and has a "plunger" button.
When you press the brake pedal, that allows the plunger button to extend, which closes contacts inside the switch, and makes the brake lights come on.
If and when that switch either breaks or gets loose, the plunger will stay extended, and the brake lights will stay on, discharging the battery.
God bless your efforts to see & fix this.
have the abs module checked for codes to find out what the problem is.when the system detects a fault in the system it turns on the abs light and check the e-brake to make sure its all the way off.the humming noise sounds like its coming from the abs hydraulic unit that`s not shutting off.
Each wheel has its own ABS sensor. Check to make sure that you haven't accidently disconnected the wire from 1 of the wheel hubs. If they are connected then you have to check and make sure the sensor is not damaged. If yoiu cannot see any obvoius damage then you need to test each wheel sensor to see which sensor is malfuntioning so you know which one to replace they are ezspensive so you do not want to just replace them untill you find the right one it is worth paying a garage to determind which wheel is the problem by testing each wheel.
check your brake fluid level, brake system, wheel sensors. Dirty wheel sensors usually cause the ABS light to come on. As for the brake warning light, it may be low on fluid (possible leak) or faulty E-brake switch.
check fuses and relay for ur abs- possible bad relay or abs unit -have vehicle scanned some auto stores such as auto zone /advanced auto do scan for free ur trouble code(s)will give u a place to start
Do you mean the ABS and BRAKE lights? If so, the ABS module is bad which causes both lights to come on. After rebooting, the module gets tested and the ABS light will come on after a few seconds. If it a module problem the BRAKE light will also come on. The brakes will work normally, but will not provide the anti-lock feature.
Check engine light: Turn the key on three times in succession and wait for the codes. What are the codes?
Brake ABS light: When did you last have the brakes serviced?
No AC: Do you park your truck/car in a garage? Check the AC housing for leaves and debis which will burn out the AC fan motor.
×