Key stuck in ignition 2004 chevy TB wont start i removed key switch and key replaced swicth still won;t start . key only moves forward will not move to off

How to replace Ignition Switch Chevrolet Silverado 2004

Try spraying a little WD40 into the ignition . Make sure tension is off the steering wheel. Turn steering wheel back and forth while trying to remove key.
Good Luck!
Bob

I tried the DIY service and repair manuals from a website
and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids for forward and reverse work.
I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com

Make sure your steering wheel isn't locked. Sometimes a key won't turn until you jiggle the wheel while trying to turn the key.

Call 6ya. Experts who can help 24/7 and actually work in the field. I'm on all evening for support and the service is totally free.

If you need further help, reach me via phone at https://www.6ya.com/expert/dave_641d453707669356

Your shifter cable sounds like it separated from the transmission or shifter or just broke. you are probably stuck in a moving gear so the neutral safety switch is disabling the ignition.

You have to have the key coded with the ignition switch at a lock smith,or the dealer.

Push gear selector up past park and it should loosen up, or press hard on the brake pedal. Shifter up past park usually loosens it up. Common GM problem.

It sounds like it just needs to be reinitialized. Turn your key to the on position with motor off and hold the up/full vent button down for at least 30 seconds or until your sunroof either clicks or goes to the full vent position. That should fix your problem.

Try to move the steering wheel back and forth. If that don,t work try to disconnect the neg - side of the battery. this will at least kill the engine.