2006 acura tl #6 fuse, interior light, draws to much amps with car switched off , take fuse out , fine ,if dont take fuse out , kills battery in 4 or 5 days

Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link. 2006 Acura TL Service Repair Manual Software

alarm keeps going off - Acura Forum : Acura Forums

www.acuraworld.com > ... > CL > 1st Gen CL

Jun 6, 2011 - 8 posts - ‎4 authors
Now the alarm is suddenly going off when I put the fuse back in. ... I am going to print it and keep it with my stuff in my Acura folder. ... as i connect the battery terminals and wont turn off with the remote. can you help me on this one please? ... Join Date: Sep 2012. Posts: 2. Car 1: 1998 Acura 2.3 Cl. alarm ...

1999 TL Deactivate Alarm/pull the fuse - AcuraZine Community

acurazine.com/.../problems.../1999-tl-deactivate-alarm-pull-fuse-746888/

Oct 4, 2009 - Is there a way that I can deactivate the alarm on my car. ... It is very annoying, especially when it goes off for no reason in the .... My 2001 CL black box has 4 relays, 2 grey, 2 black.removing any and ... Troubleshooting Fail: Stuck Drivers Window, xsilverhawkx, Problems & Fixes, 5, 09-28-2015 07:51 PM. 2005 TL, HFL Malfunction and Parasitic Draw
May 7, 2012
2012 TL Remote Starter
Jul 15, 2011
99 acura tl stuck in park and brake lights won't work
Aug 25, 2010
1999 Acura 3.2TL shuts down on its own
Jul 20, 2009
More results from acurazine.com

Check fusible links.

Most draws come from the starter, alternator, and radio. Some will come from the interior lights. Most interior light draws are from the sun visor lights for the mirror in the visor. Another could be a wire for the dome light coming from the door switch. Possibilities are endless, but this is what I have found. Good luck...

Good chance you smoked the main fuse from the battery to the fuse and relay box.
There should be a 100amp maxi fuse, just follow the positive battery cable with a test light or meter.

check for blowed 80 amp fuse to battery in the battery fuse box.

check the voltage at the battery post itself. If you have a corroded clamp, the alt will not charge. If you dont have around 14v at the post but you do at the clamp, a simple cleaning may fix the issue. also check all of the grounds.

The switch that lights the bulb is not good ,it must be change,you will find this switch under the gear shift lever

Hi. Anything over about 300 milliamps is generally to high. illumi sounds like an abbreviation of illumination. with the fuse out try all your lighting, interior lights, dash lights ect. and see what doesn't work. a common problem is boot lights sticking on as they often cant be seen with the boot closed.