There are a few things you can check. The first thing and most likely what the problem is would be the fuel cut off switch. Below is a picture of it the location of it. Where you see the blue arrow pointing down is where the button is that you push to reset it if it is "popped". If that is good the next thing you can check is the fuse for the fuel pump. That fuse is located in the power distribution box located in the engine compartment under the hood (picture of that location below as well) I also gave you a diagram of the layout of the fuses with numbers. The fuse for the fuel pump is the fuse located in the number 10 position and should be a 20 amp fuse. Last you may need to check the fuel pump relay. That relay is located in the same fuse panel and will be the one marked number 301. I hope this helps and good luck.
What's the problem with the car? It doesn't start? If you put a little more info I can help you. An engine won't start for several reasons, but two of them are the must important, it doesn't get enough gas, or you don't have ignition tu burn that fuel
SOURCE: The 4WD will not disengage on my 1999 ford expedition
hey well i have similar problem on my 2000 awd, it seems to get stuck on 4 all the time. when i turn it grinds and thumps like heck. anybody knows how to go about this prob?
SOURCE: 1999 ford Expedition caliper removal
IT IS RUSTED ON GO TO YOUTUBE AND SEARCH
"Remove Rusted Brake Rotors"
1,385 views
Usually answered in minutes!
the pump isn't working , or the motor isn't starting ?
×