NEED RADIO CODE FOR 01 DIAMANTE BUT DON'T HAVE SERIAL #

You will need to call the Mitsubishi dealer for the code. Some dealers make you come in to prove you own the radio.

take the radio out and write down the serial number reistall the radio and take the car to a mitsubishi dealer and they will give you the code after showing them the serial number and that you are the registered owner of the diamante. i have done this many times even with honda. they might want to charge you for the code but dont pay beacuse they usually do this service for free.

In the USA anyone can get their radio code for free direct from Mitsubishi by telephone. You will need the following information:
Last 8 characters of your VIN # Radio Serial Number
Call Mitsubishi:
1-888-648-7820, option 1, option 4 Current hours: 6am to 5pm Pacific, M-F.
Tell representative that you replaced your battery and now need your radio code. If you are not currently a registered owner, they will ask for your info for registration. ==============================================================
If not in the USA then sorry....Main MITSUBISHI Dealer or Radio Decoding Service only for this code
It will not be available for free or cheap from anywhere on the Internet

contact your local mitsubishi dealer and give them the chassis number and they can supply the code

http://www.radio-code.com/

you will need the radios serial number to find out the code via the dealership,on the 94 diamante you will need to remove the center console to gain access to the screws that hold the radio bezel-good luck

You need to pull the radio out, get the serial # off of it and take it to the dealer. They can get you the unlock code for the radio unless someone has changed it.

Need code for radio
Model# MR490090
Serial# 99D22887

you have to go to new car dealer with radio and title of car

just call the dealer and give them the serial number and the vin of the car make sure to ask for service deparment when you call
they shoul be able to give you the code